DIMM 32 GB DDR5-6000 (2x 16 GB) kit duplo, memória RAM prateada, AX5U6000C3016G-DCLANRSG, Lancer Neon RGB, INTEL XMP, AMD EXPO

The XPG LANCER RGB DDR5 32 GB 6000 MHz is a dual-channel (2 x 16 GB) DDR5 memory module designed for desktop PCs. It features a multicolour RGB lighting surface, ECC on-die error correction, and a 288-pin DIMM form factor. The module operates at 6000 MHz with CAS latency 30 and a nominal voltage of 1.35 V, combining performance, stability and modern lighting for gaming and high-performance systems.

Advantages

This memory module uses an eco-friendly IMR heatsink made from 50% PCR plastic and FSC-certified packaging to reduce carbon emissions. It supports high transmission speeds and stable clocks up to 8,000 MT/s with carefully selected memory chips and a 10-layer PCB. An exclusive heat-dissipating coating on the PCB lowers operating temperature by about 10%, while a built-in Power Management IC (PMIC) improves power stability and efficiency. On-die ECC provides real-time error correction, and support for Intel XMP 3.0 and AMD EXPO simplifies overclocking and platform compatibility. RGB lighting (approx. 60% illuminated surface) is controllable via major motherboard RGB software or XPG Prime for synchronized light effects.

Suitable for

• Gaming desktop builds requiring 32 GB DDR5 memory
• High-performance systems and content creation
• Overclocking enthusiasts using Intel XMP 3.0 or AMD EXPO
• PC builders who want RGB lighting and eco-conscious components

Key specifications

• Capacity: 32 GB (2 x 16 GB)
• Memory type: DDR5
• Clock speed: 6000 MHz (supports higher profiles up to 8,000 MT/s)
• CAS latency: 30
• Voltage: 1.35 V
• Form factor: 288-pin DIMM
• ECC: On-die ECC
• Weight: 0.055 kg
• Product colour: Multicolour
• MPN: AX5U6000C3016G-DCLANRSG
• EAN: 4711085948977

How to use

Power off your PC and disconnect it from mains power before installing the DIMM. Open the motherboard DIMM slot latches, align the module’s notch with the slot key, insert the module evenly until the latches click into place. After assembly, power on the system and enter the BIOS/UEFI to verify memory recognition. To enable performance profiles, activate Intel XMP 3.0 or AMD EXPO in BIOS/UEFI; alternatively control RGB lighting using motherboard vendor software or XPG Prime on a supported system.

Recommendations

Install modules in matched channel pairs and consult your motherboard manual for supported speeds and slot population. When overclocking, enable XMP or EXPO profiles rather than manual voltage increases; ensure adequate case cooling to maintain stable temperatures.