Ar condicionado portátil AEG AXP26U339CW 64 dB branco classe energética A

The AEG AXP26U339CW portable air conditioner provides mobile cooling with a maximum cooling capacity of 9000 BTU/h. Designed in white with an LED display and touch controls, this unit uses R290 refrigerant and has an hourly cooling energy consumption of 1 kWh. With dimensions of 472 mm (W) x 383 mm (D) x 705 mm (H) and a weight of 31.5 kg, it is suitable for temporary or seasonal cooling in a variety of indoor spaces. The unit is rated Energy Class A (cooling) and operates at a noise level of 64 dB, offering a balance of efficiency and performance.

Advantages

The AEG AXP26U339CW combines a compact footprint with portable design, allowing relocation between rooms without permanent installation. Energy Class A and a cooling consumption of 1 kWh per hour support predictable energy use. The included dehumidifying and fan modes expand its functionality beyond cooling, while the LED display and touch control enable simple, direct operation. Use of R290 refrigerant provides effective cooling performance with an improved environmental profile compared with older refrigerants. The unit's 64 dB noise rating is specified to help assess suitability for living areas.

Suitable for

• Cooling single rooms or small apartments up to the unit's capacity
• Temporary or seasonal climate control in rented or non-permanent spaces
• Rooms where dehumidifying is needed in addition to cooling
• Workspaces or hobby rooms that require a mobile cooling solution

Key specifications

• Model: AEG AXP26U339CW (MPN: AXP26U339CW, EAN: 7332543979646)
• Cooling capacity (max): 9000 BTU/h
• Hourly energy consumption (cooling): 1 kWh
• Energy efficiency class (cooling): A
• Cooling energy efficiency (EER): 2.6 W/W
• Noise level: 64 dB
• Refrigerant: R290
• Functions: Cooling, Dehumidifying, Fan
• Colour: White
• Dimensions (W×D×H): 472 × 383 × 705 mm
• Weight: 31.5 kg

How to use

Place the portable air conditioner on a flat, stable surface near a window or outlet for exhaust hose venting according to the included installation instructions. Connect the exhaust hose to the window kit and ensure an unobstructed airflow path. Use the touch control panel and LED display to select cooling, dehumidifying, or fan mode and to adjust fan speed and temperature setpoint. Allow the unit to reach operating temperature; during initial use the system may run continuously until the set temperature is achieved. Regularly empty any internal condensate collection if a continuous drain is not connected.

Recommendations

For best results, seal gaps around the exhaust window installation to reduce heat ingress and prevent short-circuiting of cooled air. Maintain clear airflow around the unit (minimum clearance as specified in the manual) and clean or replace filters per the manufacturer schedule to preserve performance and indoor air quality.