BRADAS Fita de rega gota a gota 16 mm HIRRO 500 m, 8 mil, 1,5 l/h, espaçamento entre emissores 20 cm, preto

Precision drip irrigation tape for row crops, greenhouses, orchards, and gardens. The BRADAS 16 mm HIRRO tape delivers 1.5 liters per hour per emitter at 20 cm spacing, ensuring uniform moisture distribution across the entire 500-meter roll. Its UV-stabilized polyethylene construction withstands harsh sunlight and common agricultural chemicals, making it a reliable choice for single or multi-season use.

Advantages

Flat emitters with labyrinth paths provide consistent flow rates and resist clogging when used with proper filtration. The 8 mil wall thickness balances durability and flexibility, allowing easy installation with standard 16 mm barbed fittings. Non-pressure compensating design operates optimally between 0.5 and 1.0 bar, reducing energy costs while maintaining over 90% water distribution uniformity.

Suitable for

• Row crops such as vegetables, strawberries, and melons
• Greenhouse and nursery production
• Orchards and vineyards
• Home gardens and landscape beds

Key specifications

• Tape diameter: 16 mm
• Wall thickness: 8 mil (0.2 mm)
• Roll length: 500 m
• Emitter flow rate: 1.5 L/h
• Emitter spacing: 20 cm
• Material: UV-stabilized polyethylene (PE)
• Recommended operating pressure: 0.5–1.0 bar (7–15 PSI)
• Maximum operating pressure: 1.5 bar (22 PSI)
• Minimum filtration: 120 mesh (130 micron)
• Color: Black
• Manufacturing standard: ISO 9261

Recommendations

For optimal performance, install a 120 mesh filter and flush the system before first use. Use pressure regulators to maintain 0.5–1.0 bar. Secure the tape with stakes and close the ends with end caps. Store away from direct sunlight when not in use.