Cabo de alimentação ACT ficha de rede CEE 7/7 (angular) - C19 azul 0,6 m

The ACT Powercord CEE 7/7 male angled C19 blue 0.6 m 230V 16A is a short, purpose-built power cable designed for connecting equipment that requires a C19 inlet to mains power via a CEE 7/7 plug. Its compact 0.6 m length and angled CEE 7/7 connector make it suitable for installations where space is limited behind racks, cabinets or desktop equipment. The cable is rated for 230 V and 16 A and comes in a blue colour for easy visual identification.

Advantages

This powercord combines a CEE 7/7 male angled plug with a C19 coupler to provide a reliable, low-profile connection for high-current devices. The short 0.6 m length reduces excess cable clutter and improves airflow in enclosed spaces. The angled connector allows the plug to sit closer to a wall or cabinet, minimizing mechanical stress on the cord entry. The blue jacket helps to quickly distinguish the cable among other power leads.

Suitable for

• Powering servers, UPS units and network equipment with a C19 inlet
• Connections in server racks and network cabinets with limited rear clearance
• Desktop or lab equipment where a short, identifiable power lead is preferred

Key specifications

• Cable length: 0.6 m
• Input voltage: 230 V
• Current rating: 16 A
• Connector 1: CEE 7/7 angled male
• Connector 2: C19 coupler
• Colour: Blue

How to use

Connect the angled CEE 7/7 male plug to a compatible mains socket and attach the C19 coupler to the device inlet intended for C19 connectors. Ensure both ends are fully seated and that the cable is routed without sharp bends or kinks. Verify that the connected device's required voltage and current do not exceed the cord's 230 V and 16 A ratings before powering on.

Recommendations

Use this cable for short runs inside racks or cabinets to reduce clutter and improve cooling. Avoid using the cable where extended flexing or mechanical strain is expected; secure the cable to prevent tension on connectors. Inspect the jacket and connectors periodically for damage and replace the cable if any wear or exposed conductors are found.