Cabo de patch ACT Marfim 0,5 m LSZH SFTP CAT6A com fichas RJ45

The ACT Ivory 0.5m LSZH SFTP CAT6A patch cable with RJ45 connectors is a short, shielded Ethernet cable designed for high-speed network connections. It follows the Cat6a specification and uses S/FTP (S‑STP) shielding to minimize electromagnetic interference. The LSZH (Low Smoke Zero Halogen) jacket reduces toxic smoke and halogen gas emissions in case of fire, and the cable is available in an ivory colour with a 0.5 m length.

Advantages

The S/FTP shielding provides improved protection against crosstalk and external interference compared with unshielded cables. The Cat6A standard supports higher bandwidth and is suitable for 10 Gigabit Ethernet over short distances. The LSZH jacket reduces the release of corrosive and toxic gases during combustion, making the cable suitable for installations in confined or poorly ventilated spaces. Compact 0.5 m length simplifies connections between nearby devices without excess cable slack.

Suitable for

• Connecting network devices over short distances (patching between switch and workstation)
• Environments requiring low-smoke, zero-halogen materials (public transport, aircraft interiors, server rooms)
• High-performance home or office networks supporting Cat6A speeds

Key specifications

• Length: 0.5 m
• Standard: Cat6A
• Shielding: S/FTP (S‑STP)
• Connectors: RJ‑45 to RJ‑45
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Colour: Ivory
• CPR Euroclass compatibility: Eca

How to use

Plug one RJ45 connector into the network port of a switch, router or patch panel and plug the other connector into the network port of a computer, access point or other network device. Ensure connectors are fully seated until the locking tab clicks. Use the 0.5 m cable to create tidy, short links between nearby devices; avoid tight bends near the connector ends to prevent damage to the cable shielding and conductors.

Recommendations

For best performance, use this Cat6A S/FTP LSZH cable for short horizontal patching and in locations where low smoke and low halogen emissions are required. Avoid running the cable through high-temperature environments and do not exceed specified bend radii.