Dissipador de CPU Mars Gaming MCPU66 Triple ARGB com 6 heatpipes HCT TDP 220W e 2 ventoinhas de 12cm

The most EXTREME cooling with 6 heatpipes, double fan and impressive TRIPLE ARGB lighting. With an impressive cooling capacity of 220W TDP, it outperforms many liquid coolers.

EXTREME PERFORMANCE: TDP 220W
Able to support CPUs up to 220W TDP, thanks to its 6 ultra-efficient heatpipes with HCT technology, its large radiator with high-density fins and its TWO 120mm fans, it allows you to configure the most powerful computers without the need to use liquid cooling systems. In addition, the innovative 4-pin PWM technology will always guarantee the lowest possible noise.

DOUBLE 120MM ARGB FAN
Capable of surpassing the efficiency of many liquid cooling systems, MCPU66 uses two spectacular transparent ARGB fans with a perfect balance between silence, performance and spectacularity.

SPECTACULAR TRIPLE ARGB LIGHTING
Both the radiator and the two built-in fans feature spectacular ARGB lighting that is fully controllable with motherboards or ARGB controllers. But don't worry if you don't have ARGB control devices, just by connecting the MCPU66 you will get the most spectacular automatic Rainbow CHROMA lighting effect.

UNIVERSAL MULTISOCKET
Thanks to its universal multi-socket, the MCPU66 heatsink has wide compatibility that allows you to use it with a large number of motherboards, offering support for both INTEL LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150/1366 and AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1

FULL COMPATIBILITY
MCPU66 supports Addressable RGB motherboards, giving you complete control over the lighting via the included 3-pin 5V ARGB connector. You'll have complete freedom to manipulate the light however you like, with full compatibility with systems like Asus Aura Sync, Mystic Light Sync, and RGB Fusion.

Mars Gaming MCPU66 Triple ARGB CPU Heatsink 6 Heatpipes HCT TDP 220W 2 Fans 12cm. Type: Air cooler, Fan diameter: 12 cm, Rotational speed (min): 800 RPM, Rotational speed (max): 1600 RPM. Voltage: 12 V. Width: 156 mm, Depth: 133 mm, Height: 102 mm. Product colour: Silver, Transparent

How to use

Install the MCPU66 following the included mounting instructions for your processor socket: secure the universal backplate and mounting brackets, place the heatsink on the CPU with thermal paste applied, and fasten the cooler evenly. Connect the two 120 mm fan power connectors to the motherboard fan headers or a fan hub and attach the 3-pin 5V ARGB cable to a compatible ARGB header if you want motherboard control; without ARGB control the cooler will default to the automatic Rainbow CHROMA lighting effect.

Recommendations

For optimal performance, ensure adequate case airflow, use a good-quality thermal paste, and verify RAM and PCIe clearance relative to the cooler dimensions. Use the motherboard BIOS or software to configure PWM fan curves and ARGB effects according to noise and cooling priorities.