Placa riser FUJITSU S26361-F3846-L32 esquerda — interface de expansão para servidor

Fujitsu left riser card S26361-F3846-L32 is an expansion component designed for the PRIMERGY RX2540 M4 server. It provides additional PCI Express slots to increase the server's I/O capacity and accommodate add-in cards for networking, storage controllers or other peripherals. The module matches the form factor and compatibility requirements of the Fujitsu PRIMERGY RX2540 M4 system.

Advantages

The riser card offers a compact, system-specific expansion solution that preserves server bay layout while adding one full-height PCIe 3.0 x8 slot and one full-height PCIe 3.0 x16 slot. It supports low-profile compatibility for one x16 slot and is manufactured to Fujitsu specifications to ensure proper fit and electrical compatibility with the PRIMERGY RX2540 M4.

Suitable for

• Adding network interface cards (NICs) to the PRIMERGY RX2540 M4
• Installing storage controller or RAID cards
• Expanding GPU or accelerator connectivity within supported power and cooling limits
• General PCIe expansion for custom I/O requirements in the server

Key specifications

• Manufacturer: FUJITSU
• Model / MPN: S26361-F3846-L32 (Left)
• Designed for: PRIMERGY RX2540 M4
• Slot configuration: 1 × PCIe 3.0 x8 (full-height), 1 × PCIe 3.0 x16 (full-height)
• Compatible low-profile slot: 1 × PCIe 3.0 x16 (low-profile)
• EAN: 4057185789202

How to use

Power down and unplug the server before installation. Remove the server cover and locate the left riser slot according to the PRIMERGY RX2540 M4 hardware manual. Align the riser card with the system connector and press firmly until seated; secure any retention screws or latches supplied by the server. Reassemble the chassis, reconnect power and boot the system. Verify that installed PCIe cards are recognized in the system BIOS or operating system and install vendor drivers as required.

Recommendations

Confirm compatibility with your PRIMERGY RX2540 M4 configuration, including available power, cooling and physical clearance for added cards. Use Fujitsu-approved parts and follow the server manual instructions to avoid damage and maintain warranty coverage.