Kingston Technology FURY 48GB 6000MT/s DDR5 CL32 DIMM Renegade prateado XMP

Push the limits like never before with Kingston FURY™ Renegade DDR5 memory, designed for extreme performance on next-gen DDR5 platforms. Enhance your system with UDIMM or CUDIMM module types for the boost it needs to stay on top with ultra-fast memory up to 8000MT/s with UDIMMs and at 8400MT/s* with CUDIMMs. Kingston FURY Renegade DDR5 features sleek, newly designed aluminum heat spreaders in either black & silver or white & silver to complement the look of the latest PC builds by system builders and DIY PC enthusiasts. Available in single module capacities up to 48GB and Dual Channel kits of 2 with capacities up to 96GB.

Engineered to maximise performance
With UDIMM speeds up to 8000MT/s and CUDIMM speed of 8400MT/s, Kingston FURY Renegade DDR5 features enhanced overclocking performance with improved stability at higher speeds for AI PC workloads and other rigorous computing demands.

Tap into extreme overclocking potential
DDR5 ushers in a whole new era of memory technology to make extreme overclocking a more stable option than previous generations. On-die ECC delivers more reliable DRAM components, an on-board PMIC balances power when and where it’s needed, and two independent 32-bit subchannels provide dramatic increases in data efficiency for multi-core processors.

Intel® XMP 3.0 certified
Intel Extreme Memory Profile technology makes overclocking a breeze with advanced pre-optimised factory timings, speeds and voltages for overclocking performance. Kingston FURY Renegade DDR5 features a programmable PMIC for XMP 3.0, supporting up to two customisable profiles to optimise your own unique timings, speeds and voltages saved directly to the DIMM.

Qualified by the world’s leading motherboard manufacturers**
Tested and trusted for your preferred motherboard so you can build with confidence.

Aggressive aluminium heat spreader design
Newly designed black & silver and white & silver aluminium heat spreaders with black PCB keep your rig running – and looking – cool to complement the look of your latest PC build.

Kingston Technology FURY 48GB 6000MT/s DDR5 CL32 DIMM Renegade Silver XMP. Component for: PC, Internal memory: 48 GB, Memory layout (modules x size): 1 x 48 GB, Internal memory type: DDR5, Memory form factor: 288-pin DIMM, CAS latency: 32

How to use

Power down the PC and disconnect all cables before installation. Open the desktop chassis and locate an available 288-pin DDR5 DIMM slot on a compatible motherboard. Align the module’s notch with the slot and insert the DIMM at an angle or straight depending on your motherboard’s retention clips until the clips snap into place. Reconnect power and peripherals, then enter the system BIOS/UEFI to confirm memory recognition. To enable higher performance, load the Intel XMP 3.0 profile if supported by your motherboard; save and reboot to apply the profile.

Recommendations

Install the module on a DDR5-compatible motherboard that supports UDIMM modules and the target data rate. For dual-channel or multi-module configurations, install matching modules in the recommended slots as specified by the motherboard manual. Ensure adequate case airflow for sustained high-load scenarios and use the latest BIOS/UEFI to maximise compatibility and stability.