Módulo de memória CoreParts MMHP166-2GB 1 x 2 GB DDR3 240-Pin DIMM ECC

The CoreParts MMHP166-2GB is a 2GB DDR3 memory module with a 1333 MHz clock and ECC support, intended for use in PCs and servers that require error-correcting memory. This single-module configuration provides additional system memory while matching the performance characteristics of original modules. The module is finished in green and is compatible with DDR3 slots supporting 1333 MHz operation and ECC functionality.

Advantages

The module uses original chipset components to ensure stable operation and data integrity thanks to ECC. Its 1333 MHz frequency offers standard DDR3 performance for typical desktop and server workloads. As a single 2 GB module, it allows targeted upgrades to increase available memory without replacing entire kits, and the low weight and standard form factor simplify installation.

Suitable for

• Upgrading servers that require ECC memory support
• Expanding RAM in desktops or workstations with DDR3 1333 MHz slots
• Replacing a faulty 2 GB DDR3 ECC module

Key specifications

• Brand: MicroMemory (CoreParts product)
• Model / MPN: MMHP166-2GB
• Capacity: 2 GB
• Type: DDR3
• Clock speed: 1333 MHz
• ECC: Yes
• Colour: Green
• Weight: 0.05 kg
• EAN: 5706998871497

How to use

Power off the computer and disconnect it from the mains. Open the chassis according to the manufacturer's instructions, locate an empty DDR3 ECC-compatible memory slot (or remove the existing module if replacing), align the notch on the module with the slot, and press down evenly until the retention clips lock. Close the chassis, reconnect power, and start the system. Verify that the BIOS/UEFI detects the new 2 GB module and that ECC functionality is enabled if required by the system.

Recommendations

Install modules of the same type and speed for optimal stability; when used in multi-channel configurations, match capacities and timings. Ensure your motherboard and processor support DDR3 1333 MHz and ECC before purchasing.