RUKO HGB-DIN352-HSS-55° M5 Macho de roscar manual, HSS-G, DIN 352, retificado, 3 ranhuras

Cutting internal metric threads by hand can be slow and imprecise, but this RUKO taper tap solves that with a ground HSS-G body and DIN 352 geometry for clean, accurate M5 threads in unalloyed and low-alloyed steels, cast iron, and non-ferrous metals.

Who is it for

Machinists, metalworkers, and maintenance technicians who need reliable hand tapping of M5 coarse threads in common materials.

Main features

• Ground from HSS-G high-speed steel for durability and sharp cutting edges.
• Conforms to DIN 352 for standard metric coarse thread dimensions.
• Taper tap (Vorschneider) with 3 straight flutes for easy chip evacuation.
• 60° flank angle and ISO 2 (6H) tolerance for precise thread fit.
• Square shank for secure grip in tap wrenches.

Specifications

• Material: HSS-G (High-Speed Steel Ground)
• Standard: DIN 352
• Thread type: Metric coarse
• Nominal thread diameter: M5
• Thread pitch: 0.8 mm
• Thread direction: Right-hand
• Tap type: Taper tap
• Number of flutes: 3
• Flank angle: 60°
• Tolerance class: ISO 2 (6H)
• Recommended pre-drill diameter: 4.2 mm
• Shank type: Square
• Shank diameter: 4.5 mm
• Square size: 3.4 mm
• Overall length: 70 mm
• Thread length: 16 mm
• Surface finish: Bright (uncoated)
• Cutting edge geometry: Straight flutes
• Manufacturing process: Ground (G)

Tips

Use a suitable tapping lubricant and back off periodically to break chips. Pre-drill with a 4.2 mm bit for best thread engagement.