RUKO HGB-DIN352-HSS-60°-N.º10 macho de roscar manual M10 x 1,5 mm, HSS, DIN 352

Cutting clean internal threads in unalloyed and low-alloyed steels requires a tap that holds its edge and follows the DIN 352 standard. The RUKO HGB-DIN352-HSS-60°-Nr.10 is a single hand tap (plug tap, Form B) made from high-speed steel, ground with a 60° flank angle for metric coarse threads. It produces an M10 thread with a 1.5 mm pitch and 6H tolerance, right-hand cutting direction.

Who is it for

Workshop professionals, metalworkers and maintenance technicians who need reliable thread cutting in steel components, jigs and repair parts. The tap suits manual threading with a tap wrench or low-speed machine use.

Main features

• High-speed steel (HSS) for wear resistance and long tool life.
• DIN 352 geometry with 60° flank angle for standard metric threads.
• Metric coarse thread M10 × 1.5 mm, tolerance 6H.
• Right-hand cutting, bright uncoated surface.
• Overall length 70 mm, thread length 24 mm, shank diameter 7 mm, square drive 5.5 mm.

Specifications

• Standard: DIN 352
• Material: High-Speed Steel (HSS)
• Thread type: Metric coarse
• Nominal diameter: M10
• Thread pitch: 1.5 mm
• Thread tolerance: 6H
• Cutting direction: Right-hand
• Flank angle: 60°
• Overall length: 70 mm
• Thread length: 24 mm
• Shank diameter: 7 mm
• Square drive size: 5.5 mm
• Recommended core hole diameter: 8.5 mm
• Surface treatment: Bright (uncoated)
• Tap type: Single hand tap (plug tap, Form B)

Tips

Drill the core hole to 8.5 mm before tapping. Use a suitable cutting fluid for steel to improve thread finish and extend tool life. For blind holes, clear chips regularly.