RUKO SCE-DIN22568-HSS-60°-1-1/4 Macho de roscar paralelo HSS-G para rosca de tubo, 1 1/4 polegadas, DIN 22568

This RUKO pipe thread tap cuts G 1 1/4 parallel pipe threads to DIN 22568. Unlike tapered pipe taps, the parallel thread form suits mechanical joints where the thread itself does not seal. The HSS-G ground flutes deliver clean threads in steel, cast iron, non-ferrous metals and plastics.

Highlights

• Thread type: G (BSP-P) parallel pipe thread
• Nominal size: 1 1/4 inch, 11 TPI, 55° Whitworth form
• Right-hand cutting, 4 flutes
• Bright finish, HSS-G ground

In daily use

The 140 mm overall length and 50 mm thread length suit through holes and blind holes with sufficient clearance. The 28 mm shank and 22 mm square drive fit standard tap wrenches. A core hole of 41.25 mm is recommended for the 1 1/4 inch thread.

Full specifications

• Standard: DIN 22568
• Material: HSS-G (high-speed steel, ground)
• Thread pitch: 11 TPI
• Thread angle: 55° (Whitworth)
• Cutting direction: right-hand
• Number of flutes: 4
• Overall length: 140 mm
• Thread length: 50 mm
• Shank diameter: 28 mm
• Square drive size: 22 mm
• Recommended core hole diameter: 41.25 mm
• Surface finish: bright
• Suitable materials: steel, cast iron, non-ferrous metals, plastics

Final note

For internal G 1 1/4 parallel threads, this tap matches DIN 22568 and is ground from HSS for accurate pitch and long tool life.