Troço de fibra ótica Optocom pré-montado OM4 50m 4G50/125 I/ADQ ZN BH LC-D/LC-D auxiliar de puxagem

Running out of patience with field-terminated fiber that tests bad or takes hours to polish? This Optocom pre-terminated OM4 trunk cable eliminates on-site termination entirely. Each end arrives factory-polished and tested to meet tight insertion loss and return loss specs, so your 40/100G links go live faster. The 50-meter length is ideal for patching between racks, across data center rows, or from a distribution panel to active equipment.

Who is it for

Network engineers, data center technicians, and structured cabling installers who need a reliable, plug-and-play multimode backbone. It is equally suited for SAN directors, core switches, or high-density fiber panels in enterprise and colocation environments. If your project demands OM4 performance without the mess of epoxy and cleavers, this cable is your answer.

Main features

• Factory pre-terminated LC-Duplex connectors on both ends – no field polishing required
• OM4 laser-optimized multimode fiber supports 10G up to 550m and 40/100G up to 150m
• 4 fibers in a loose-tube construction with aqua indoor/outdoor jacket
• Integrated pulling aid (Einziehhilfe) protects connectors during installation through conduits or cable trays
• 50/125µm core/cladding with low attenuation: ≤2.3 dB/km @850nm, ≤0.6 dB/km @1300nm
• Effective modal bandwidth of 4700 MHz·km @850nm ensures error-free high-speed transmission
• RoHS and REACH compliant – safe for use in any region

Specifications

• Fiber type: OM4 multimode
• Length: 50 meters
• Fiber count: 4
• Connector A: LC-Duplex
• Connector B: LC-Duplex
• Core/cladding: 50/125 µm
• Jacket rating: Indoor/Outdoor (Universal)
• Jacket color: Aqua
• Attenuation @850nm: ≤2.3 dB/km
• Attenuation @1300nm: ≤0.6 dB/km
• Bandwidth (OFL) @850nm: ≥3500 MHz·km
• Bandwidth (EMB) @850nm: ≥4700 MHz·km
• Bandwidth (OFL) @1300nm: ≥500 MHz·km
• Cable type: Loose tube
• Operating temperature: -20°C to 70°C
• Compliance: RoHS, REACH
• Application: Data center, SAN, LAN, backbone cabling

Tips

Always inspect and clean both connector end faces with a one-click cleaner before mating – even factory-new connectors can pick up dust. Use the pulling aid to route the cable through tight spaces, but never pull directly on the connectors. For best performance, pair this cable with OM4-compatible transceivers and patch panels. Store excess length in a figure-eight coil to avoid macrobend loss.