ACT azul 0,15 m LSZH U/UTP CAT6 cabo de ligação slimline para datacenter snagless com fichas RJ45

The ACT Blue 0.15m Cat6 U/UTP Snagless RJ45 patch cable is a slimline Category 6 Ethernet lead designed for data centers and dense network environments. With a 3.8 mm diameter and LSZH jacket, this 0.15 m cable combines a compact profile with snagless RJ45 connectors and gold-plated contacts to provide reliable connections while improving airflow in server racks and network cabinets.

Advantages

Compared with standard CAT6 patch cords, the slimline cable has a smaller diameter and a reduced bending radius, which helps optimize cable management and airflow in confined spaces. The cable follows U/UTP construction suitable for typical networking use and uses 28 AWG conductors, allowing a thinner profile though with higher attenuation at higher frequencies. The snagless RJ45 boots protect the connector clip during installation and the LSZH jacket reduces harmful smoke in case of fire.

Suitable for

Key specifications

How to use

Connect one RJ45 end to the network port on your switch, patch panel or device and the other end to the corresponding port to establish the link. Route the cable through the rack or cable trays, taking advantage of the slim 3.8 mm diameter to reduce congestion and improve airflow. Ensure connectors are fully inserted until the clip clicks to secure the connection.

Recommendations

For Power over Ethernet (PoE) deployments, limit bundled groups to a maximum of 24 slimline cables to avoid excessive temperature rise; this follows ACT guidance and aligns with ANSI TSB-184-A limits on temperature increase for center cables in a bundle. Note that 28 AWG conductors produce higher attenuation at higher frequencies compared with 22–26 AWG cables, so verify link performance for longer or high-frequency runs.