ACT cabo de alimentação ficha CEE 7/7 (angular) - C13 preto 5 m

Power cord ACT AK5016 with an angled CEE 7/7 plug and a C13 coupler, designed for 230 V and rated for 10 A. The cable is 5 m long and finished in black. Wire cross-section meets the standard requirement: cables of 2.50 m and above use 3x1.00 mm² conductor. VDE / Kema approved for safety and compliance.

Advantages

The angled CEE 7/7 plug allows easier insertion in tight spaces while the C13 coupler provides a universal connection to compatible devices. A 5 m length offers greater placement flexibility. The cable uses the specified conductor size for lengths ≥2.50 m to ensure safe current capacity, and it is certified by VDE/Kema.

Suitable for

• Connecting desktop computers and monitors to a 230 V mains supply
• Powering servers, UPS units and network equipment with C13 inlets
• Situations requiring an angled mains plug to fit wall sockets or power strips

Key specifications

• Cable length: 5 m
• Connector 1: CEE 7/7 angled (male)
• Connector 2: C13 coupler
• Rated voltage/current: 230 V, 10 A
• Conductor size: 3x1.00 mm² (for lengths ≥2.50 m)
• Colour: Black
• Approvals: VDE / Kema

How to use

Insert the angled CEE 7/7 plug into a compatible 230 V mains socket and connect the C13 coupler to the device's C13 inlet. Ensure the connected device's current requirement does not exceed 10 A. Route the cable to avoid sharp bends and mechanical strain on the connectors. Disconnect power before performing any maintenance on connected equipment.

Recommendations

Use this power cord indoors and in dry environments. Avoid using extension cords or adapters that alter the grounding. Replace the cable if the insulation is damaged or if connectors show signs of wear.