ACT Cabo de rede U/UTP CAT6 cinzento de 1,5 metros com proteção da patilha e fichas RJ45

ACT patch cables feature full copper conductors and meet ANSI/TIA568-C2-1 performance requirements. The Grey 1.5 m U/UTP CAT6 cable with RJ45 connectors and a snagless design supports high-speed data transmission and is suitable for structured copper networks and PoE applications. The cable is compatible with CPR Euroclass Eca and has gold-plated contacts for reliable connections.

Advantages

The ACT Patch Cable provides full copper conductors for optimal signal conductivity and PoE compatibility, ANSI/TIA568-C2-1 compliance for certified performance, a snagless RJ45 design to protect the connector latch during installation, and gold-plated contacts to improve durability and connection quality.

Suitable for

• Connecting switches, routers and patch panels in LANs
• Power over Ethernet (PoE) powered devices such as IP cameras and VoIP phones
• Short to medium cable runs in office and home network setups (1.5 m)

Key specifications

• Cable type: U/UTP CAT6
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45, snagless
• Conductor: full copper
• Contacts: gold-plated
• Colour: Grey
• Standards: ANSI/TIA568-C2-1 compliant; CPR Euroclass: Eca

How to use

Insert each RJ45 connector into the corresponding network port until the latch clicks into place. Use the 1.5 m ACT patch cable to link switches, routers, patch panels or networked devices. For PoE devices ensure both ends are connected to PoE-capable ports. To disconnect, press the connector latch and gently pull the plug from the port.

Recommendations

For reliable PoE performance and long-term stability, avoid sharp bends and excessive tension on the cable, keep cable runs clear of high-voltage power lines, and use appropriate cable management to reduce stress on connectors.