Adaptador de cabo de vídeo Vivolink PRODVIADAPHDMI 0,2 m DVI-D HDMI preto

The Vivolink PRODVIADAPHDMI is a 0.2 m DVI-D to HDMI male adapter cable designed to connect devices with a DVI-D output to HDMI displays. The cable supports resolutions up to 1920x1080p@60Hz in standard use and is constructed with an ultra-flexible jacket. It is RoHS compliant, has a 6 mm diameter and weighs approximately 10 g.

Advantages

The adapter provides a compact and lightweight connection solution for DVI-D to HDMI signal transfer, combining small form factor with a flexible cable for easier routing. Its compliance with RoHS ensures reduced hazardous substances in the construction.

Suitable for

• Connecting a desktop or graphics card DVI-D output to an HDMI monitor or TV
• Short, tidy connections where a 0.2 m cable is sufficient
• Portable setups and brief AV adjustments

Key specifications

• Length: 0.2 m
• Connectors: DVI-D (male) to HDMI (male)
• Supported resolution: up to 1920x1080p@60Hz (standard use)
• Construction: ultra-flexible cable, 6 mm diameter
• Weight: ~10 g
• RoHS compliant
• Brand: VivoLink, MPN: PRODVIADAPHDMI, EAN: 5712505641163

How to use

Connect the DVI-D male end to the DVI-D output on your source device and the HDMI male end to the HDMI input on the display. Ensure both devices are powered off or that you follow the display and source hot-plugging recommendations from the device manufacturers. After connection, power on the devices and select the appropriate HDMI input on the display.

Recommendations

While the adapter supports 4K only under specific conditions, typical use supports up to 1920x1080p@60Hz. For 4K output the DVI source must be an independent graphics card capable of 4K and the DVI connector must be a 24+1 dual-link DVI; 18+1 single-link DVI does not support 4K.