Arrefecedor de ar DeepCool AK400 WH — 4×6 mm heatpipes de cobre, ventoinha FDB de 120 mm, 1850 rpm, 66,47 CFM, compatível com LGA 1700 e sockets Intel/AMD comuns, branco

The DeepCool AK400 WH is a white 120 mm air cooler with a four heat-pipe tower and a matrix fin array, designed to provide effective cooling for mainstream desktop CPUs. It supports multiple Intel and AMD sockets and offers up to 220 W of heat dissipation capacity while maintaining a compact footprint that fits a variety of PC cases.

Advantages

The AK400 WH combines four direct-touch copper heat pipes with a single fin-stack tower and a high-performance fluid dynamic bearing (FDB) fan to deliver efficient heat transfer and low operating noise. Its compact dimensions and wide socket support make it suitable for many builds, and the white finish provides a clean aesthetic for modern systems.

Suitable for

• Cooling mainstream desktop CPUs with up to 220 W TDP
• Compact and mid-tower PC builds where space is limited
• Systems requiring a white-themed or visually neutral cooler
• Users who prefer a balance of low noise and effective airflow

Key specifications

• Type: Air cooler
• Fan diameter: 120 mm
• Maximum air pressure: 2.04 mmH2O
• Dimensions (W x D): 127 mm x 97 mm (compact tower footprint)
• Weight: 0.661 kg
• Supported sockets: Socket AM4, LGA 1700, LGA 1200 (H5), LGA 1155 (H2), LGA 1151 (H4), LGA 1150 (H3)
• Colour: White

How to use

Install the DeepCool AK400 WH by following the provided five-step mounting procedure using the included all-metal bracket and hardware. Apply thermal paste to the CPU heatspreader, position the cooler so the heat pipes make direct contact with the processor, and secure the bracket according to your motherboard socket type. Connect the fan to the CPU_FAN or appropriate header and verify fan operation in the system BIOS or monitoring software.

Recommendations

For optimal results, ensure adequate case airflow (intake and exhaust) and confirm RAM and PCIe clearance before mounting. Use the correct mounting kit for your CPU socket and reapply thermal paste when reinstalling the cooler.