Balastro/Driver LED Osram QTP5 2X14…35, vida útil 100000 h, entrada 198–264 V, 50/60 Hz, 24 A, -20–50 °C, 30×360×21 mm

Osram QTP5 2X14…35 ballast/LED driver is a compact control gear designed for linear luminaires and retrofit installations that require long operational life and stable performance. The unit supports a broad mains range and is intended for continuous operation in diverse ambient conditions. Its slim housing allows integration into fixtures with limited space while delivering regulated output suitable for LED modules or fluorescent lamp loads within the specified range.

Advantages

The device offers an extended rated lifetime of 100000 hours, ensuring reduced maintenance and fewer replacements over the life of the installation. It accepts a wide AC input voltage range of 198–264 V at 50/60 Hz and provides reliable operation across an ambient temperature span from -20 to 50 °C. The compact dimensions (30 × 360 × 21 mm) enable installation in narrow luminaire housings and retrofit scenarios where space is constrained. Built by a well-known lighting manufacturer, the driver is designed for consistent electrical performance and thermal stability.

Suitable for

• Linear LED luminaires and troffers with limited internal space
• Retrofit conversions of fluorescent fixtures to LED modules
• Commercial and industrial indoor installations with moderate temperature variation
• Applications requiring long-life control gear to minimize service interventions

Key specifications

• Rated lifetime: 100000 hours
• Input voltage: 198–264 V AC
• Input frequency: 50/60 Hz
• Input current: 24 A
• Operating ambient temperature: -20 to 50 °C
• Output configuration: suitable for 2 × 14…35 lamp/module range
• Dimensions (L×W×H): 360 × 30 × 21 mm

How to use

Install the ballast/LED driver in accordance with local electrical regulations and the luminaire manufacturer’s mounting requirements. Ensure the driver is mounted on a stable surface that allows adequate heat dissipation and that wiring is performed with power disconnected. Verify the luminaire or LED module is compatible with the 2 × 14…35 output range, connect mains to the specified input terminals, and secure all connections. After power-up, confirm correct operation and absence of abnormal noise or overheating before completing the installation.

Recommendations

For optimal longevity, provide adequate ventilation around the unit and avoid enclosing it in fully sealed housings without thermal management. Use in ambient temperatures within the specified -20 to 50 °C range and protect the driver from direct exposure to moisture and corrosive atmospheres. Periodic inspection during routine maintenance is recommended to confirm secure connections and normal thermal behavior.