Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo

BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
29,10 €
The BlueOptics SFP3131BU10MK InfiniBand Fibre Optic Cable 10 m LC Yellow is a 10‑meter single‑mode duplex patch cord with LC/UPC connectors and G.657.A1 (E9/125 µm) laser‑optimized fibre. It is designed for full‑duplex high‑speed data links, supporting transmission windows around 1310 nm and 1550 nm... Ler mais
Stock 296 Código 1498210 Marca BLUEOPTICS Modelo SFP3131BU10MK Garantia 2 anos

Envios e devoluções

Entrega prevista Quinta-feira, Outubro 29
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics SFP3131BU10MK InfiniBand Fibre Optic Cable 10 m LC Yellow is a 10‑meter single‑mode duplex patch cord with LC/UPC connectors and G.657.A1 (E9/125 µm) laser‑optimized fibre. It is designed for full‑duplex high‑speed data links, supporting transmission windows around 1310 nm and 1550 nm. The cable features a yellow LSZH jacket for reduced smoke and no halogen release in case of fire and is intended for use with patch panels, optical transceivers and InfiniBand equipment requiring single‑mode LC connections.

Advantages

The cable uses single‑mode G.657.A1 fibre for low attenuation and effective bending performance in confined routing environments. Connectors employ zirconia ceramic ferrules for consistent alignment and long mating life, and each assembly is factory‑tested with interferometry and OTDR to provide measured insertion loss and return loss data. The LSZH jacket meets common industrial flame and safety standards while keeping cable diameter and flexibility suitable for rack and data‑centre cabling.

Suitable for

Key specifications

How to use

Inspect connector endfaces before use and remove protective dust caps. Route the fibre cable without tight bends and secure it with appropriate cable management to avoid microbending. Insert the LC connectors into the transceiver or patch panel ports until they latch. For best performance, verify link loss using appropriate test equipment and compare against the supplied measurement protocol. When disconnecting, press the LC latch and pull on the connector body rather than on the cable.

Recommendations

Store and handle the cable according to standard fibre‑optic practices: avoid exceeding the specified minimum bend radius for G.657.A1 fibre, keep connectors clean, and use dust caps when not connected. Match connector polish (UPC or APC) and transceiver requirements to minimise return loss. For permanent installations use cable trays or conduits and avoid mechanical stress from sharp edges.

Destaques principais
  • Connecting optical transceivers in InfiniBand and fibre channel systems
  • Patch panel to transceiver links in data centres and server rooms
  • High‑speed point‑to‑point links requiring LC duplex single‑mode interfaces
  • Environments where low smoke and halogen‑free cables are required
  • Length: 10 m
  • Connector type: Duplex LC/UPC to LC/UPC
  • Fibre type: Single‑mode G.657.A1 (E9/125 µm)
  • Core diameter: 9 µm
  • Transmission windows: 1310 nm / 1550 nm
  • Attenuation: approximately 0.4 dB/km (typical)
  • Jacket: LSZH (low smoke, zero halogen)
  • Duplex/full‑duplex communication
Especificações
Certificação
IEC-61034,IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950
Certificados de conformidade
RoHS
Comprimento do cabo
10 m
Comprimentos de onda suportados
1550, 1310
Conector 1
LC
Conector 2
LC
Cor do produto
Yellow
Diâmetro do cabo
2 mm
Diâmetro do núcleo
9 µm
Diâmetro do revestimento
125 µm
Duplex integral
Yes
Estrutura do modo de fibra
Single-mode
Género do conector 1
Male
Género do conector 2
Male
Material da bainha
Low smoke zero halogen (LSZH)
Material do conector
Ceramic
Não contém
Halogen
Peso
0.08 kg
Quantidade por embalagem
1 pc(s)
Tipo de fibra ótica
G.657.A1
Tipo de polimento do conector
UPC
Histórico de preços nos últimos 6 meses
BlueOptics SFP3131BU10MK cabo de fibra ótica InfiniBand 10 m LC amarelo
Atual
29,10 €
Mais baixo
27,58 €
Mais alto
43,52 €
Variação 24 h
+0,49 €   +2%
Semana
+0,36 €   +1%
Mês
+0,12 €   +0%

Produtos populares nesta categoria

Vendedor: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vílnius, Lituânia · Código da empresa 303192950 · NIF/IVA UE LT100008198612 · Envio a partir da UE (Lituânia)
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.