Transceptor de cobre SFP+ 10 Gbps CBO SFP-10G-RJ45-80M, 10GBASE-T, RJ45

CBO SFP-10G-RJ45-80M is an SFP+ copper transceiver module that delivers 10 Gbps Ethernet over standard RJ45 interfaces using 10GBASE-T signalling. Built to fit SFP+ ports on switches, servers and network appliances, the module enables short-reach copper links without changing existing cabling infrastructure. The compact SFP+ form factor supports hot-plug installation and interoperates with equipment accepting standard SFP+ copper modules.

Advantages

The module supports full 10 Gbps throughput over twisted-pair copper cabling for cost-effective short-distance connections. Its SFP+ form factor conserves port space compared with larger transceiver types and allows direct insertion into compatible ports for plug-and-play operation. The RJ45 interface provides broad compatibility with existing CAT6/CAT6A infrastructure and simplifies deployment for server uplinks, top-of-rack switches and access layer aggregation.

Suitable for

• 10G uplinks between switches in data center top-of-rack deployments
• Server network interfaces requiring copper connectivity
• Short-reach interconnects over existing CAT6/CAT6A cabling
• Network equipment with SFP+ ports that require RJ45 copper transceivers

Key specifications

• Data rate: 10 Gbps (10GBASE-T)
• Interface: RJ45 (8P8C) connector
• Form factor: SFP+ (10 Gigabit Small Form Factor Pluggable Plus)
• Reach: designed for short-reach copper links (up to specified distance over appropriate twisted-pair cable)
• Compatibility: for use in SFP+ ports on switches, servers and network appliances
• Installation: hot-pluggable

How to use

Insert the SFP+ copper transceiver into a compatible SFP+ port until it latches, then connect the RJ45 connector of a suitable twisted-pair cable to the module. Ensure the connected switch or server port supports 10GBASE-T over SFP+ copper modules and verify link negotiation and speed via device management interfaces. No additional drivers are typically required when the host equipment supports standard SFP+ transceivers; consult the equipment manual for any vendor compatibility settings or firmware recommendations.

Recommendations

For reliable 10 Gbps performance, use high-quality CAT6A cabling or certified CAT6 cable within the tested distance. Minimize electromagnetic interference by routing cables away from power lines and heavy electrical equipment. Verify that the network device firmware supports SFP+ copper modules and perform link tests after installation to confirm negotiated speed and stability.