Bomba submersível Einhell 4170773

The GC-DP 1020 N dirty water pump (Einhell 4170773) is a submersible pump designed for removing dirty or contaminated water from ponds, construction pits, flooded basements and similar locations. It features a stainless steel housing and a robust 1,000 W motor that can pump up to 18,000 litres per hour with a maximum delivery height of 9 m and a maximum immersion depth of 5 m. A 10 m power cord and compact dimensions make the unit convenient to position and transport.

Advantages

The stainless steel pump housing increases durability and resistance to corrosion during prolonged use. A high-grade mechanical seal protects the motor and reduces maintenance needs. An infinitely variable float switch allows selection between continuous operation and automatic on/off switching at a chosen water level. The pump includes a universal hose connection, a 90° bracket and a carry-handle for easier handling.

Suitable for

• Pumping water from garden ponds and decorative water features
• Draining construction pits and trenches
• Removing water from flooded cellars and basements
• General water extraction where suspended solids or debris are present

Key specifications

• Brand: EINHELL
• Model / MPN: 4170773 (GC-DP 1020 N)
• Power: 1,000 W
• Max. delivery rate: 18,000 l/h
• Max. delivery height: 9 m
• Max. immersion depth: 5 m
• Cord length: 10 m
• Housing material: stainless steel
• Dimensions (W×D×H): 170 × 225 × 415 mm
• EAN: 4006825598681

How to use

Place the GC-DP 1020 N in the water to be pumped, ensuring the unit is fully submerged but positioned on a stable surface. Connect a suitable discharge hose to the universal connection and secure it. Select the desired float switch mode: continuous operation for uninterrupted pumping or set the ON/OFF levels for automatic switching. Plug the pump into a properly grounded power outlet and monitor the operation while the pump removes water. After use, disconnect power, rinse the housing if necessary, and store the pump in a dry place.

Recommendations

The pump is intended for dirty water containing solids within the limits specified by the manufacturer; avoid pumping highly abrasive or corrosive fluids. Regularly check the mechanical seal and the float switch for debris to maintain reliable operation. Observe local electrical safety regulations and use a residual-current device (RCD) when operating near water.