Bomba submersível Einhell GE-DP 18/25 LL Li 153 W 0,5 bar 7000 l/h

The Einhell GE-DP 18/25 LL Li-Solo is a battery-powered submersible waste water pump designed for flexible, cordless use in locations without mains power. Part of the Einhell Power X-Change system, the pump accepts compatible 18 V batteries (sold separately) and features a splash-proof battery box with wall bracket and fastening hooks for convenient mounting. A 5 m connection cable allows the submersible unit to be placed up to 4 m deep, and the pump can move water to a maximum delivery height of 5 m. The 160 W motor delivers up to 7,000 litres per hour at a maximum pressure of 0.5 bar. The rotatable housing base enables switching between handling waste water with up to 25 mm solids and clear water with up to 1 mm grain size, and flat-suction operation leaves as little as 1 mm residual water when pumping clear water.

Advantages

The cordless design provides mobile operation independent of a power outlet, and the Power X-Change compatibility allows use of the same 18 V batteries across devices. Two power levels — ECO for extended runtime and BOOST for maximum output — let you balance performance and battery life. The splash-proof battery box protects the battery and can be wall-mounted or hung on rain barrels and fences. A 42 mm (1 1/4") pressure connection and supplied universal adapter for 25/32 mm hoses (1") provide flexible hose connection options. The lightweight construction and double-sided carrying handle simplify transport.

Suitable for

• Pumping waste water with solids up to 25 mm
• Pumping clear water where low residual water (down to 1 mm) is required
• Garden drainage, emptied rain barrels and small flooded areas
• Temporary water removal in locations without mains power

Key specifications

• Brand: EINHELL
• Model: GE-DP 18/25 LL Li-Solo (MPN 4181590, EAN 4006825668780)
• Power source: 18 V battery (Power X-Change) — battery and charger not included
• Motor power: 160 W
• Max. flow rate: 7,000 l/h
• Max. pressure: 0.5 bar
• Max. delivery height: 5 m
• Max. immersion depth: 4 m (with 5 m connection cable)
• Max. particle size: 25 mm (waste water) / 1 mm (clear water)
• Pressure connection: 42 mm (1 1/4" AG) with universal adapter for 25/32 mm hoses (1" AG / 33.3 mm)
• Residual water level (flat suction, clear water): 1 mm
• Minimum starting water level: 10 mm
• Weight: approx. 3.3 kg

How to use

Mount a compatible Power X-Change 18 V battery into the splash-proof battery box and secure the box using the integrated wall bracket or fastening hook if required. Place the submersible pump in the water to be removed, ensuring the water level is at least 10 mm before starting. Use the rotatable housing base to set the pump for waste water (up to 25 mm solids) or clear water (1 mm grain size) and connect the discharge hose to the 42 mm pressure connection using the supplied universal adapter if needed. Select ECO mode for longer runtime or BOOST mode for maximum performance, then switch on the pump. Monitor operation and battery level; stop the pump when the target water level or the minimal residual water level is reached. After use, rinse the pump if necessary and store the unit and battery in a dry place.

Recommendations

Use only Einhell Power X-Change 18 V batteries compatible with the GE-DP 18/25 LL Li-Solo and avoid running the pump dry. Clean the pump and remove large debris before storage. For prolonged or heavy use, choose ECO mode to extend battery life and BOOST mode for short periods when higher output is required.