BRADY DuraSleeve Marcação de cabos DMC-1.5/2.5-16 Etiqueta termorretrátil de poliolefina, 19,05 mm x 6,4 m, branco, 3:1, para BMP21-PLUS/M210/M211

When permanent, legible wire identification is non-negotiable, the BRADY DuraSleeve DMC-1.5/2.5-16 sets the standard. Unlike adhesive labels that peel or flag over time, this heat-shrink sleeve becomes a seamless, protective layer around the wire itself. The 3:1 shrink ratio ensures a tight, secure fit even over connectors and irregular shapes, while the matte white polyolefin surface delivers crisp, high-contrast black printing that resists smudging, oil, and abrasion. Compatible with BRADY BMP21-PLUS, BMP21-LAB, M210, and M211 thermal transfer printers, this cartridge is ready for industrial environments where clarity and durability are critical.

Highlights

• Heat-shrink polyolefin construction for permanent, tamper-evident marking
• 3:1 shrink ratio conforms tightly to wires, cables, and components
• Print technology: thermal transfer for sharp, long-lasting black text
• Compatible with BRADY BMP21-PLUS, BMP21-LAB, M210, M211 label printers
• Resists abrasion, chemicals, corrosion, humidity, oil, solvents, UV, and weather
• UL Recognized (UL 224) and RoHS compliant for safety and environmental assurance

In daily use

Technicians rely on DuraSleeve for wire and cable identification in electrical panels, control cabinets, and field installations. The sleeve slides over a 16-10 AWG wire before termination, and after shrinking, it stays put through vibration, temperature swings from -55°C to 135°C, and exposure to harsh fluids. The white background with black print meets industry standards for legibility and long-term readability.

Full specifications

• Material: Heat-shrink polyolefin
• Label type: PermaSleeve PS heat-shrink sleeve
• Print colour: Black
• Sleeve colour: White
• Print technology: Thermal transfer
• Roll length: 6.4 m (21 ft)
• Roll width: 19.05 mm (0.75 in)
• Shrink ratio: 3:1
• Wire gauge compatibility: 16-10 AWG
• Wire diameter range (pre-shrink): 1.57 - 2.64 mm (0.062 - 0.104 in)
• Sleeve diameter (pre-shrink): 5.97 mm (0.235 in)
• Sleeve diameter (post-shrink): 1.98 mm (0.078 in)
• Operating temperature range: -55°C to 135°C (-67°F to 275°F)
• Resistance properties: Abrasion, chemical, corrosion, humidity, oil, solvent, UV, weather
• Compliance: RoHS compliant, UL Recognized (UL 224)
• Application: Wire and cable identification, electrical panel marking
• Finish: Matte

Final note

For critical wire marking that must survive harsh environments and remain legible for years, the BRADY DuraSleeve DMC-1.5/2.5-16 delivers unmatched durability and print quality.