Cabo coaxial de satélite ShiverPeaks 80108-128-20 F-Quick 100% blindado, 75 Ω

The ShiverPeaks 80108-128-20 Satellite coaxial cable with F‑Quick connectors is designed for reliable satellite TV and RF signal transmission. This 75 Ω cable features full 100% shielding to reduce electromagnetic interference and preserve signal integrity over a 20.0 m length. It is suitable for indoor and outdoor routing and intended to connect LNBs, satellite receivers, multiswitches and wall outlets with quick, threaded F‑Quick terminations that include a central pin for stable contact.

Advantages

The cable’s complete 100% shielding provides improved immunity to external noise and crosstalk, helping maintain consistent picture and sound quality. The 75 Ω impedance matches standard satellite and antenna systems to minimise return loss. F‑Quick connectors enable fast, secure connections without additional adapters and the construction supports both indoor and outdoor installations when properly protected at entry points. The cable’s 20 m length offers flexibility for routing between rooftop installations, multiswitch locations and indoor outlets.

Suitable for

• Connecting LNBs on satellite dishes to receivers or multiswitches
• Wiring wall outlets for satellite TV distribution in homes and small businesses
• Extending existing satellite coax runs where 20 m length is required
• Indoor and outdoor routing with proper weatherproofing at connectors and entry points

Key specifications

• Characteristic impedance: 75 Ω
• Shielding: 100% braided and foil shielding for high attenuation (>100 dB typical)
• Connector type: F‑Quick with central pin, threaded connection
• Cable length: 20.0 m
• Colour: white

How to use

Route the cable from the satellite dish or multiswitch to the receiver or wall outlet following the shortest practical path that avoids sharp bends and sources of strong electromagnetic interference. Secure the F‑Quick connectors by hand-tightening the threaded coupling until firm; do not over-tighten with pliers to avoid damaging the connector. When used outdoors, apply appropriate weatherproofing at exposed connectors and entry points to prevent moisture ingress. Verify continuity and signal levels with a satellite meter or receiver diagnostics after installation.

Recommendations

For best results, avoid kinking the cable and maintain bend radii greater than the cable diameter. Use UV-resistant clips or conduits for prolonged outdoor exposure and seal all outdoor connector joints with self-amalgamating tape or silicone sealant. If longer runs or multiple splits are required, plan signal distribution and amplification to compensate for insertion loss.