Cabo de alimentação ACT ficha CEE 7/7 (angular) - C15 amarelo 1,5 m

The ACT Powercord CEE 7/7 male angled to C15 is a 1.5 m mains cable designed for 230 V and 10 A supply. It pairs a CEE 7/7 plug with an IEC C15 coupler on an H05RN-F type flexible rubber cable and is intended for use where higher temperatures may occur at the equipment inlet. The cable is supplied in yellow and is suitable for powering network switches and other electrical devices that accept a C15 inlet.

Advantages

This powercord combines a widely used CEE 7/7 mains plug with an IEC C15 coupler rated for higher temperature at the appliance side, providing a reliable 230 V / 10 A connection. The H05RN-F construction gives mechanical flexibility and durability for standard indoor and light industrial environments. The angled CEE 7/7 plug reduces strain in tight spaces, and the yellow jacket enhances visibility for cable routing and safety.

Suitable for

• Powering network switches and IT equipment with a C15 inlet
• Applications requiring a higher-temperature-rated appliance connector
• Installations where a 1.5 m length and angled plug are preferred

Key specifications

• Connector 1: CEE 7/7 angled male
• Connector 2: IEC 60320 C15 coupler
• Cable type: H05RN-F flexible rubber
• Cable length: 1.5 m
• Voltage / Current: 230 V / 10 A
• Colour: Yellow
• Brand / MPN / EAN: ACT / AK5297 / 8716065509328

How to use

Check that the device accepts an IEC C15 inlet and that the mains supply matches 230 V / 10 A. Insert the angled CEE 7/7 plug into the mains socket and connect the C15 coupler to the device inlet until it seats securely. Route the cable to avoid sharp bends, hot surfaces and tripping hazards. Disconnect by pulling the plug, not the cable, and inspect periodically for wear or damage.

Recommendations

Use this cable indoors or in light industrial settings; avoid prolonged exposure to direct sunlight or chemicals. Replace the cable if the insulation is damaged or connectors become loose.