Cabo de alimentação ACT ficha CEE 7/7 angular C15 amarelo 2 m 250V 10A

The ACT Powercord mains connector CEE 7/7 male angled C15 yellow 2 m 250V 10A is a 2-metre power cable with an angled CEE 7/7 plug and an IEC C15 coupler. It is rated for up to 250 V and 10 A and is intended for applications where a higher temperature resistance is required at the equipment end; it is commonly used to power network switches and other IT equipment. The yellow jacket improves visibility and helps with cable identification in installations.

Advantages

The cable combines an angled CEE 7/7 male plug with an IEC C15 coupler to provide reliable connection to equipment requiring a temperature-resistant inlet. With a 2 m length it offers flexible placement of devices, and the 10 A / 250 V rating matches common mains requirements for network and small IT equipment. The yellow colour simplifies identification in multi-cable environments and supports organised cabling.

Suitable for

Key specifications

How to use

Connect the angled CEE 7/7 plug to a compatible mains socket and insert the IEC C15 coupler into the equipment's C15 inlet. Ensure the plug and coupler match the equipment and local mains specifications before powering on. Route the cable to avoid sharp bends, heat sources, and tripping hazards. Inspect connectors for damage before each use.

Recommendations

Use this cable with equipment designed for a C15 inlet and within the 250 V / 10 A rating. Do not exceed the specified current or voltage, and avoid using the cable where mechanical strain, prolonged exposure to solvents, or extreme temperatures could damage insulation. Replace the cable if any damage to the jacket or connectors is observed.