Cabo de alimentação Amarelo 3 m ShiverPeaks 09-05042

The ShiverPeaks Power cable Yellow 3 m (09-05042) is a three-meter mains lead with a CEE7/7 plug on one end and an IEC C13 coupler on the other. Designed for devices that operate from a 230 V supply, this bright yellow cable combines visibility with a standard connector set commonly used for computers, monitors, printers, and other office or industrial equipment. The cable’s length provides flexible placement options while the molded connectors ensure a firm electrical connection.

Advantages

The cable’s high-visibility yellow jacket improves safety by making the lead easier to see in busy or dimly lit environments. Durable molding at both ends increases mechanical strength and reduces the risk of connector damage from bending or tugging. The CEE7/7 to C13 configuration matches widely used mains sockets and IEC inlet standards, providing compatibility with a broad range of electrical appliances. The 3 m length balances reach and cable management for home, office, or light industrial setups.

Suitable for

• Desktop computers and workstations
• Monitors and display equipment
• Printers, scanners and peripherals
• Network devices and small servers with C13 inlets
• Temporary power runs in workshops or event spaces

Key specifications

• Length: 3 meters
• Input voltage: 230 V
• Plug type (mains end): CEE7/7
• Coupler type (device end): IEC C13
• Color: yellow
• Construction: molded connectors with insulated cable jacket

How to use

Connect the CEE7/7 plug to a compatible 230 V mains socket and insert the IEC C13 coupler into the device’s C13 inlet until fully seated. Ensure the cable is routed to avoid sharp bends, pinch points, and heat sources. For installation, position the cable so it does not create a tripping hazard and secure it with cable ties or channels where required. Before each use inspect the jacket and connectors for visible damage and do not use the cable if the insulation is cut or connectors are loose.

Recommendations

Use the ShiverPeaks yellow power cable for indoor equipment rated for 230 V and with IEC C13 inlets. Avoid exposure to prolonged direct sunlight, excessive moisture, or temperatures beyond the device manufacturer’s specified range. For permanent installations or high-current applications consult an electrician to confirm suitability and compliance with local electrical regulations.