Cabo de alimentação para PC DELOCK 81326 — com terra CEE 7/7 (90°) para IEC C13, 2 m, 3×0,75 mm², preto

DELOCK PC power cord 81326 is an earthed mains cable with a right-angled (90°) CEE 7/7 plug to an IEC 60320 C13 female connector. The 2 m H05VV-F cable with conductor cross-section 3×0.75 mm² is rated for up to 250 V and designed to supply mains power to PCs, monitors, servers and other devices that accept an IEC C13 inlet where a space-saving, angled plug is required.

Advantages

The angled CEE 7/7 plug minimises strain on wall outlets and is suitable for installations with limited clearance behind equipment. The standardized IEC C13 connector ensures broad compatibility with computer power supplies, monitors and many IT devices. Constructed with an H05VV-F PVC-sheathed cable and three 0.75 mm² conductors, the lead provides reliable power transmission while maintaining flexibility for routing. Rated for 250 V and up to 6 A, the cable is manufactured to meet relevant safety standards to support both domestic and professional use.

Suitable for

• Connecting desktop PCs and workstations to mains power
• Powering monitors and small form-factor servers
• IT infrastructures with limited clearance behind devices
• Home office setups and office workplaces

Key specifications

• Cable type: H05VV-F with PVC sheath
• Length: 2 m
• Conductors: 3 × 0.75 mm²
• Plug: earthed CEE 7/7, angled 90°
• Connector: IEC 60320 C13 (female)
• Rated voltage: 250 V
• Rated current: up to 6 A
• Colour: black

How to use

Insert the IEC C13 connector into the device inlet until it seats securely and plug the angled CEE 7/7 mains plug into an appropriate earthed wall outlet. Ensure the cable is routed without sharp bends or kinks and avoid placing it under heavy objects. Verify that the device’s rated voltage and current requirements are within the cable’s specifications before use. Disconnect by pulling the plug rather than the cable to avoid damaging the conductors or connectors.

Recommendations

For safe and long-lasting operation, use the cable only within its rated electrical limits, avoid exposing it to excessive heat or chemical agents, and inspect connectors and sheath for signs of wear before connecting. Where continuous high-load operation or specific national regulations apply, consider selecting a cable or installation that matches local electrical codes and power requirements.