Cabo de carregamento para veículos elétricos ROLINE 3 m Type 2 7,4 kW preto

The ROLINE electric vehicle charging cable 3m Type 2 7.4kW Black is a three-metre charging lead with Type 2 connectors designed for charging electric vehicles at single-phase AC charging points. Supporting up to 7.4 kW of charging power and a maximum current of 32 A, this cable provides a stable connection between vehicle and charger while complying with the Type 2 interface used by most modern EVs in Europe. The black, flexible jacket and ergonomic connectors are intended for everyday use at home, at work, or at public charging stations that support a Type 2 inlet.

Advantages

This Type 2 charging cable offers compatibility with a wide range of electric vehicles that accept the Type 2 standard and with AC charging stations delivering single-phase power. The 3 m length balances reach and manageability, allowing convenient parking positions without excessive cable bulk. Rated for 32 A, the cable supports charging at the cable's maximum of 7.4 kW where vehicle and charger allow. The construction focuses on reliable electrical contact and user handling, with a robust outer sheath designed for repeated connection cycles.

Suitable for

• Home charging from a single-phase wallbox or AC socket outlet where Type 2 is supported
• Workplace charging points with Type 2 connectors
• Public AC charging stations providing Type 2 sockets up to 7.4 kW
• Owners of EVs that accept Type 2 inlet for everyday charging needs

Key specifications

• Cable length: 3 m
• Connector type: Type 2 – Type 2 (both ends)
• Maximum power: 7.4 kW (single-phase)
• Maximum current: 32 A
• Number of phases: 1 (single-phase AC)
• Color: Black
• Suitable for standard Type 2 EV inlets and Type 2 AC charging sockets

How to use

Inspect the cable and connectors for visible damage before each use. Park the vehicle with the Type 2 inlet accessible, then insert one Type 2 connector into the vehicle inlet until it locks or seats securely. Insert the other Type 2 connector into the charging station or wallbox socket. Start charging according to the charging station or vehicle instructions; the cable itself requires no separate controls. After charging is complete, stop charging via the vehicle or charging point, unlock the connector if required, and remove both ends. Store the cable in a dry place away from direct sunlight and chemical exposure.

Recommendations

Use the cable with compatible single-phase Type 2 charging points and vehicles rated for up to 32 A to achieve the specified 7.4 kW charging. Avoid using the cable if connectors or the sheath are damaged, and keep connectors clean and dry. For frequent outdoor use, periodically check for wear and store the cable protected from extreme temperatures and moisture to extend service life.