Cabo de coluna ShiverPeaks 06-151011, 0,75 mm² (24×0,2) CCA, transparente, 25 m

Speaker cable ShiverPeaks 06-151011, 0.75 mm² (24×0.2) CCA, transparent, 25 m is a flexible audio lead designed for connecting loudspeakers to amplifiers and receivers. The conductor is copper-clad aluminium (CCA) formed from 24 strands of 0.2 mm each, providing a conductor cross-section of 0.75 mm² and a transparent PVC insulation that allows visual inspection of the cores. The cable is intended for low-voltage audio signal transmission in home audio systems, public address setups and car audio installations where a cost-efficient and flexible conductor is required.

Advantages

This speaker cable combines flexibility and economical material choice: the CCA conductor offers reduced weight and lower cost compared with pure copper while maintaining acceptable electrical conductivity for short to moderate runs. The multi-strand construction enhances bendability for routing in tight spaces and behind furniture. Transparent insulation facilitates polarity identification and visual checks during installation. The 25 m length provides sufficient reach for most room layouts without intermediate joints.

Suitable for

• Connecting passive loudspeakers to home stereo amplifiers and AV receivers
• Public address and background-music speaker wiring in small venues
• Car audio speaker runs where space and weight savings are desirable
• Temporary installations, demos and testing setups where cost-efficiency is important

Key specifications

• Conductor material: copper-clad aluminium (CCA)
• Conductor construction: 24 strands × 0.2 mm
• Conductor cross-section: 0.75 mm²
• Insulation: transparent PVC
• Cable length: 25 m
• Application: low-voltage audio signal transmission for loudspeakers

How to use

Strip the insulation carefully to expose the conductor strands, keeping polarity consistent between amplifier and speaker terminals. For reliable connections, twist the exposed strands and insert them into speaker terminals, banana plugs or crimp ferrules as required by your equipment. Route the cable to avoid sharp bends, heat sources and pinching points. For longer runs or high-power applications consider appropriate wire gauge and impedance effects; this cable is best used for short to moderate distances compatible with its 0.75 mm² cross-section.

Recommendations

Use this cable for runs where a flexible, economical solution is acceptable. Avoid using it for very long runs or high-power professional installations where pure copper conductors and larger cross-sections are recommended. Check polarity visually through the transparent insulation and secure connections to prevent oxidation at contact points.