Cabo de coluna ShiverPeaks 06-15505 0,75 mm², 50 m, vermelho/preto

Speaker cable ShiverPeaks 06-15505 0.75 mm², 50 m, red/black is a two-conductor audio cable supplied on a 50 m reel. Each conductor has a cross-sectional area of 0.75 mm² and is color-coded red and black to simplify polarity identification during installation. The cable is intended for connecting loudspeakers and basic audio equipment in home and small commercial environments where moderate run lengths are required.

Advantages

The cable combines a standardized 0.75 mm² conductor area with clear red/black polarity marking to reduce wiring errors. Supplied on a 50 m reel, it allows continuous runs without frequent joins and simplifies storage and handling. The two-conductor construction supports common speaker connections and basic stereo or mono audio layouts.

Suitable for

• Wiring passive loudspeakers in residential audio systems
• Connecting speakers in small retail, office, or hospitality spaces
• Short to moderate length speaker runs where 0.75 mm² conductor is sufficient
• Replacement or extension of existing speaker cabling with clear polarity marking

Key specifications

• Conductor cross-section: 0.75 mm²
• Number of conductors: 2 (bi-wire style: positive/negative)
• Length: 50 m on a single reel
• Color coding: red and black for polarity identification
• Typical applications: speaker and low-voltage audio connections

How to use

Measure the required run length and unspool the cable from the reel to reach the speaker and amplifier or receiver. Strip the insulation from each conductor end to the appropriate length for your connectors or terminal posts, maintaining correct polarity by aligning the red conductor to the positive terminal and the black conductor to the negative terminal. If necessary, secure the cable with clips or conduit to prevent movement and minimize strain on terminations. Avoid tight bends and keep the cable away from strong electromagnetic interference sources to preserve audio quality.

Recommendations

For reliable performance, use the cable for runs where 0.75 mm² conductor area meets the power and distance requirements of your speakers; for longer runs or higher power systems, consider larger conductor cross-sections. Ensure secure terminations and correct polarity to avoid phase issues and verify connections before full-volume use.