Cabo de fibra ótica BlueOptics 4X97A81910-BO SN LC OM4 10 m rosa

The BlueOptics 4X97A81910-BO SN LC OM4 10 m Pink is a 10 metre multimode fibre optic patch cable designed for high-speed short-range data transmission. It uses OM4 laser-optimized 50 µm core multimode fibre and SN to LC connectors in UPC polish, providing low insertion loss and consistent signal integrity for InfiniBand and other high-bandwidth environments. The cable is fitted with an LSZH (low smoke zero halogen) sheath and is finished in pink to aid identification in dense cabling infrastructures.

Advantages

This OM4 cable provides enhanced bandwidth and reduced modal dispersion compared with lower-grade multimode fibres, supporting higher data rates over typical short-distance links. The SN to LC connector configuration ensures compatibility with a wide range of transceivers and patch panel ports. The LSZH jacket reduces hazardous smoke and corrosive gas emission in case of fire and simplifies installation in confined or ventilated spaces. The pink colour improves visual management and rapid port/cable identification.

Suitable for

• Data centre short-reach links and rack-to-rack connections
• InfiniBand networks and storage area network (SAN) interconnects
• Patch panels, transceiver-to-patch panel connections and switch uplinks
• Environments requiring LSZH sheathing for safety regulations

Key specifications

• Fibre type: Multimode OM4, 50 µm core
• Length: 10 metres
• Connector A: SN (UPC polish)
• Connector B: LC (UPC polish)
• Jacket: LSZH (low smoke zero halogen)
• Colour: Pink for easy identification
• Intended application: Short-range, high-bandwidth optical links

How to use

Inspect connectors and cable ends for contamination before installation and use appropriate fibre cleaning tools if required. Route the cable avoiding sharp bends and mechanical stress; maintain the manufacturer’s minimum bend radius for multimode fibre during routing and securing. Insert the SN connector and LC connector into compatible transceiver ports or patch panel adapters until they click into place. Verify link status through your network equipment and perform optical loss or continuity testing if precise measurements are required.

Recommendations

For reliable performance, keep fibre endfaces clean and protected when not connected, avoid exceeding bend radius limits, and use labelled colour coding in your patching scheme to simplify maintenance. Use OM4 multimode for short to medium distance high-bandwidth links and pair with compatible OM4-rated transceivers and ports.