Cabo de fibra ótica BlueOptics SFP9231FU2MK MDC LC OM4 2 m magenta

The BlueOptics SFP9231FU2MK Magenta is a 2 m fibre optic patch cord engineered for high-speed multimode connections. It uses OM4 (G50/125 µm) laser-optimized multimode fibre (LOMMF) and a duplex MDC/UPC to LC/UPC connector configuration to support full-duplex transmission at 850 nm. The cable is covered by a low-smoke, zero-halogen (LSZH) jacket and is intended for reliable interconnection of patch panels, optical transceivers and other networking equipment in data centre and enterprise environments.

Advantages

This OM4 multimode cable delivers improved bandwidth and lower modal dispersion compared with lower-grade multimode fibres, enabling longer reach and higher data rates for 850 nm links. The duplex MDC to LC connector arrangement provides compact, high-density connectivity while maintaining standard LC compatibility on equipment ports. The LSZH jacket reduces hazardous emissions in case of fire and the magenta colour simplifies cable identification in dense installations.

Suitable for

Key specifications

How to use

Inspect both connector endfaces for cleanliness before installation and clean with appropriate fibre cleaning tools if required. Route the 2 m patch cord between the two ports to be connected, avoiding sharp bends and excessive pulling force; maintain bend radius recommended for multimode fibre. Insert the MDC connector into the corresponding MDC receptacle and the LC duplex plug into the LC port until each connector latches. Verify link status on connected equipment and test optical performance with appropriate test tools if needed.

Recommendations

Store and handle the cable in its original packaging until use to avoid contamination. For best performance, use this OM4 patch cord with compatible 850 nm multimode transceivers and within the supported reach for the chosen data rate. Avoid compressing or kinking the cable and keep connectors capped when not in use.