Cabo de fibra ótica OM4 Duplex MM ProXtend FO-LCLCOM4D-007 7M

The ProXtend OM4 Duplex MM Fiber Cable FO-LCLCOM4D-007 is a 7 meter LC‑to‑LC full‑duplex multimode fiber patch cable with a 50 µm glass core and UPC polish. The cable uses an OM4 multimode specification and an LSZH (Low Smoke Zero Halogen) jacket, designed for high‑speed, high‑bandwidth links in data centers and office networks while maintaining low insertion loss over moderate distances.

Advantages

This ProXtend fiber cable delivers reliable full‑duplex transmission with LC male connectors and an OM4 50 µm core that supports elevated bandwidth and modal performance compared with lower‑grade multimode fibers. The LSZH outer jacket reduces hazardous smoke in case of fire, and the cable is specified to operate in temperatures from -20 °C to 70 °C, providing robust environmental tolerance for typical indoor and rack‑mounted installations.

Suitable for

• Interconnecting switches, transceivers and patch panels in data centers
• High‑speed server uplinks and storage area network (SAN) links
• Office network backbones and structured cabling installations
• Multimode transceiver connections using LC connectors

Key specifications

• Model: FO‑LCLCOM4D‑007
• Length: 7 m
• Fiber type: OM4 multimode, 50 µm core
• Connector type: LC to LC, UPC, duplex (male)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Operating temperature: -20 °C to 70 °C
• Brand: ProXtend
• MPN: FO‑LCLCOM4D‑007, EAN: 5714590105520

How to use

Inspect both LC connector endfaces before installation and clean them with appropriate fiber cleaning tools if necessary. Route the 7 m OM4 duplex cable through cable management and place strain relief to avoid tight bends; maintain the manufacturer’s minimum bend radius. Plug LC connectors into corresponding LC ports on network devices or patch panels, ensuring proper duplex orientation for transmit and receive pairs. After connection, verify link status and run optical loss or throughput tests as required.

Recommendations

Use the OM4 duplex cable for multimode transceiver modules and distances where OM4 performance is specified; avoid using multimode cable to replace singlemode links. Store and handle connectors carefully to keep endfaces clean, and follow data center cabling standards for labeling and routing to ensure optimal performance.