Cabo de ligação de fogão AS Schwabe 70867 H05VV-F 5G2.5 1,5 m branco, revestido em ambas as extremidades

Cooker connection cable AS Schwabe 70867 H05VV-F 5G2.5, 1.5 m, white is a flexible fixed supply cable intended for connecting ovens and cookers to a 400 V, 16 A circuit. The cable features five 2.5 mm² conductors and both ends are sheathed to provide strain relief and safer termination inside appliance terminals or junction boxes. It is designed to meet common installation requirements for domestic electric cooking appliances where a dedicated, durable conductor set is required.

Advantages

The H05VV-F construction ensures flexibility for routing in tight installation spaces while maintaining adequate conductor cross-section for typical cooker loads. Both ends sheathed reduces mechanical strain on conductor terminations and improves insulation protection during installation. The five-core layout (including protective earth) supports standard three-phase or single-phase configurations used with 400 V, 16 A connections. The white outer sheath provides a neutral appearance and helps with visual identification in installations.

Suitable for

Key specifications

How to use

Before installation, ensure the supply is isolated and verify that the cable specification matches the appliance and local electrical regulations. Route the 1.5 m cable from the appliance terminal box to the fixed junction box, avoiding sharp edges and heat sources. Strip outer sheath and individual conductors to the required lengths, secure the sheathed ends for strain relief, and terminate conductors under appropriate screw terminals or connectors according to the appliance wiring diagram. Re-check conductor identification and torque settings, then restore supply and test the appliance circuit for correct operation.

Recommendations

Use this cable only for fixed wiring of cooking appliances where H05VV-F 5G2.5 is permitted by local regulations. Ensure terminations are performed by a qualified electrician, verify proper earth continuity, and avoid installing the cable where it would be exposed to mechanical damage unless additionally protected.