Cabo de patch de fibra ótica ROLINE OM3 LC/SC 50/125 µm 10 m

The ROLINE Fibre Optic Jumper Cable OM3 LC/SC 50/125µm 10m is a duplex multimode patch cable designed for high-speed data transmission in structured networks. It combines OM3 multimode fibres with LC and SC connectors to provide reliable duplex links over short to medium distances. The cable features a compact conductor construction with a movable fibre in a secondary coating, kevlar strength members for tension reduction and a PVC outer jacket; the distinct turquoise color aids identification in installations.

Advantages

High-quality connectors and fibres together with an optimized assembly process deliver low insertion loss and low back reflection. The compact conductor design reduces overall diameter while maintaining fibre protection. Kevlar reinforcement increases mechanical strength and the OM3 50/125µm core supports enhanced bandwidth for high-performance multimode applications.

Suitable for

• Data center patching and horizontal wiring
• Short- to medium-reach multimode network links
• Fiber optic equipment interconnections with LC and SC ports
• Environments requiring color-coded cabling (turquoise)

Key specifications

• Type: Fibre optic jumper, duplex
• Fibre: Multimode 50/125µm, OM3
• Connectors: LC to SC (one end LC, other end SC)
• Length: 10 m
• Cable construction: Compact conductor (fibre movable in secondary coating), kevlar tension reduction, PVC jacket
• Outer diameter: Ø 2.8 x 6 mm
• Color: Turquoise
• Brand / MPN / EAN: ROLINE / 21.15.8718 / 7611990191260

How to use

Route the duplex cable between the desired LC and SC ports, ensuring that connectors are oriented correctly for the respective equipment ports. Avoid tight bends and secure the cable to prevent strain on the connectors; the kevlar reinforcement reduces tension but does not replace proper strain relief. Clean connector endfaces before mating to minimize insertion loss and reflections.

Recommendations

For best performance, use this OM3 jumper in multimode systems designed for 50/125µm fibres, maintain minimum bend radii specified by the manufacturer, and keep connector endfaces clean. Use color-coding conventions in installations to simplify identification and maintenance.