Cabo de patch de rede EFB Elektronik MK6001W.1B, Cat6a S/FTP (S-STP), RJ-45 para RJ-45, 1 m, preto

EFB Elektronik MK6001W.1B is a 1 m Cat6a S/FTP (S‑STP) RJ‑45 to RJ‑45 patch cable designed for 10 Gigabit Ethernet connections. The cable provides overall and pair shielding to reduce electromagnetic interference and supports data rates up to 10 000 Mbit/s. One connector is moulded straight while the other is angled at 90°, and the slim moulded grommet simplifies insertion in confined spaces.

Advantages

The shielded Cat.6A construction ensures reliable high‑speed transmission and reduced crosstalk. S/FTP (S‑STP) shielding combines an overall foil with individually shielded pairs for improved protection against EMI. The slim moulded grommet and one 90° RJ‑45 connector facilitate patching in densely populated racks or behind equipment where space is limited. The cable is compatible with standard RJ‑45 ports and is suitable for both professional and home network environments.

Suitable for

• 10 Gigabit Ethernet links in data centres
• Office network patch panels and switches
• Home network connections requiring high bandwidth
• Equipment installations with limited clearance behind devices

Key specifications

• Manufacturer: EFB Elektronik
• Model / MPN: MK6001W.1B
• Type: Cat6a S/FTP (S‑STP) patch cable
• Connector: RJ‑45 to RJ‑45 (one connector 90° angled)
• Length: 1 m
• Color: black
• Data rate: up to 10 000 Mbit/s
• EAN: 4049759266141

How to use

Connect the straight or angled RJ‑45 plug to the respective network port on your switch, patch panel or device until it clicks into place. Use the angled connector where rear clearance is limited to route the cable parallel to the device. Ensure both ends are fully inserted to establish a stable 10 Gigabit link. Avoid sharp bends and excessive tension to maintain cable performance.

Recommendations

For optimal performance, use this Cat6a S/FTP patch cable for short runs between patch panels, switches and servers within racks or between nearby networked devices. Keep bend radius within manufacturer guidelines and avoid running the cable in parallel with high‑voltage power lines to minimise interference.