Cabo de rede DeLOCK 81164 RJ-45 Cat6a 1,5 m preto

The DeLOCK 81164 networking cable is a 1.5 m Cat6a RJ‑45 cable designed for high‑speed wired connections, supporting data transfer rates up to 10000 Mbit/s. It features U/FTP (STP) shielding to reduce electromagnetic interference and has RJ‑45 connectors on both ends. The flat, super‑flexible black sheath allows discreet installation under carpets, floors or behind wallpaper while offering good resistance to mechanical strain.

Advantages

The cable conforms to the Cat6a standard for 10 Gbit/s capable networks, includes U/FTP shielding to minimise crosstalk and external interference, and provides standard RJ‑45 terminations for broad compatibility. Its flat and highly flexible design facilitates installation in tight spaces and low‑profile routing.

Suitable for

• Connecting a network interface card (NIC) to a switch or router
• Patch panel to switch patching
• High‑speed LAN connections that require shielding against interference
• Cable runs under carpets, floors or behind wallpaper where a low‑profile cable is needed

Key specifications

• Standard: Cat6a
• Maximum data rate: up to 10000 Mbit/s
• Length: 1.5 m
• Connectors: RJ‑45 to RJ‑45
• Shielding: U/FTP (STP)
• Colour: Black

How to use

Plug each RJ‑45 connector into the corresponding network port on your devices, such as a NIC, switch, router or patch panel. Ensure connectors are fully inserted until the latch clicks. Route the flat cable along the desired path; its flexible design allows it to be tucked under carpets, along skirting boards or behind wallpaper. Avoid sharp bends at the connector ends to maintain signal integrity.

Recommendations

For best performance, avoid running the cable parallel and close to high‑voltage power lines. Use the cable within its specified length for 10 Gbit/s applications and avoid excessive pulling force. If permanent in‑wall installation is required, verify local building and fire safety regulations regarding cable type and ratings.