Cabo de rede Lanberg PCU6-10CC-0050-R RJ-45 Cat6 0,5 m vermelho

The Lanberg PCU6-10CC-0050-R is a Cat6 U/UTP patch cord with RJ-45 connectors and a length of 0.5 m. Designed for data transmission up to 250 MHz, it meets ANSI/TIA/EIA-568B compatibility requirements and is suitable for short connections in structured cabling, patch panels and network devices. The cable has a red (RAL3017) PVC outer jacket and a printed length counter at every meter for easy identification.

Advantages

This Cat6 patch cord uses 26 AWG stranded conductors (8*7*0.16 mm) with 0.80 mm HDPE insulation, providing stable signal transmission and flexibility for frequent handling. The U/UTP unshielded design reduces cost and is suitable where shielding is not required. The 5.4 mm PVC outer insulation ensures mechanical protection while the compact 0.5 m length is convenient for tidy patching and short links.

Suitable for

• Connecting switches, routers and patch panels in racks and cabinets
• Short links between network devices on desks and workstations
• Home and small office Ethernet connections where Cat6 performance is needed

Key specifications

• Cable category: Cat6 U/UTP (unshielded)
• Length: 0.5 m
• Conductor: 26 AWG stranded (8*7*0.16 mm), cord 7*0.16 mm
• Conductor insulation: HDPE 0.80 mm
• Outer jacket: PVC, diameter 5.4 mm, color Red (RAL3017)
• Frequency: up to 250 MHz
• Standards compatibility: ANSI/TIA/EIA-568B
• Connector: RJ-45 on both ends
• Packaging: string bag; printed length counter at every meter

How to use

Plug the RJ-45 connectors into the corresponding network ports on devices such as switches, routers or network interfaces. Route the 0.5 m cable to avoid sharp bends and mechanical strain; secure if necessary to keep connections tidy. The printed length counter is provided for longer versions—on this 0.5 m cable it identifies marking placement along the jacket.

Recommendations

Use this unshielded Cat6 patch cord for short Ethernet connections in environments without significant electromagnetic interference. For installations near strong sources of EMI or where grounding and shielding are required, choose a shielded cable variant.