Cabo de rede Lindy 1,5 m RJ45 S/FTP LSZH, cinzento

The Lindy 1.5m RJ45 Cat7 Grey network cable uses Cat.7 S/FTP LSZH cable material and is designed for high-speed Ethernet up to 10GBase-T. The cable supports operating frequencies up to 600 MHz, has total braided shielding with individual foil shielding for each pair (S/FTP) and comes with gold-plated RJ45 connectors. The cable is supplied in a protective polybag and is suitable for data centres, server rooms, rack-mounted network and control cabinets as well as home and office network connections.

Advantages

Cat.7 S/FTP construction with overall braid and pair foil shielding reduces electromagnetic interference and crosstalk. Gold-plated contacts provide corrosion-resistant, reliable connections over time. The low-smoke, halogen-free (LSZH) outer jacket increases safety in enclosed spaces. A snagless strain-relief design protects the connector latch during installation and removal.

Suitable for

• 10GBase-T networks and other high-speed Ethernet up to 600 MHz
• Data centres and server rooms
• Rack-mounted network and control cabinets
• Office and home network patching

Key specifications

• Length: 1.5 m
• Connector type: RJ-45 to RJ-45
• Cabling: Cat.7 S/FTP (overall braid + individual foil per pair)
• Bandwidth / operating frequency: up to 600 MHz
• Supports: 10GBase-T
• Contact plating: gold-plated contacts
• Jacket: LSZH (low-smoke, zero halogen)
• Colour: Grey

How to use

Connect the RJ45 connector at each end to the corresponding Ethernet ports on devices such as switches, routers, servers or wall outlets. Ensure connectors are fully inserted until the latch clicks and avoid sharp bends or pinch points near the cable ends to preserve shielding and performance. For rack installations, route the cable to minimise stress on the connectors and maintain proper separation from power cables to reduce interference.

Recommendations

Use this Lindy Cat7 S/FTP cable where maximum shielding and support for up to 10GBase-T are required. Although the cable uses Cat.7 cable material, the fitted RJ45 connectors are compatible with standard RJ45 ports; marking on the cable may read 'Cat.6A S/FTP patch cords with 600MHz raw cable'.