Cabo de rede Microconnect MC-SFTP6A015S preto 1,5 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A015S is a 1.5 m Cat6a S/FTP patch cable designed for high-speed networks requiring up to 10 Gbit/s and bandwidth up to 500 MHz. It features RJ-45 connectors with 50µ gold plating for improved contact, an S/FTP shielding construction to reduce electromagnetic interference, latch protection to prevent clip breakage and a meter marking on the boot to quickly identify cable length. The cable is black and intended for reliable performance in home and office network environments.

Advantages

The S/FTP shielding provides enhanced protection against crosstalk and external interference, while 50µ gold-plated RJ-45 contacts help ensure stable signal transmission. Latch protection increases connector durability and the meter marking on the boot makes installation and cable management easier. The 1.5 m length is suitable for short runs between devices in racks, desks or networking equipment.

Suitable for

• Connecting switches, routers and network interfaces in home or office setups
• High-speed 10Gbit LAN links and server uplinks
• Patch panels and short rack-to-device connections

Key specifications

• Product: Networking Cable Microconnect MC-SFTP6A015S
• Type: Cat6a S/FTP patch cable
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 10000 Mbit/s (10 Gbit/s)
• Bandwidth: up to 500 MHz
• Connector plating: 50 µ gold
• Colour: Black
• Weight: 0.05 kg
• MPN: MC-SFTP6A015S
• EAN: 5704174257721

How to use

Connect one RJ-45 plug to your network device (switch, router, computer) and the other RJ-45 plug to the corresponding port on the destination device or patch panel. Ensure the latch clicks into place to secure the connection. Route the cable to avoid sharp bends and sources of strong electromagnetic interference. For best performance, keep cable runs within recommended limits for Cat6a standards and avoid kinking or excessive twisting.

Recommendations

Use this Cat6a S/FTP cable for short to medium runs where 10 Gbit/s performance and reliable shielding are required; replace damaged connectors or cables to maintain signal integrity and follow structured cabling practices for neat routing and labeling.