Cabo de rede Microconnect MC-SFTP6A03O laranja 3 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A03O is a 3 m Cat6a S/FTP patch cable designed for high-speed networks requiring up to 10 Gbit/s and bandwidth up to 500 MHz. The orange cable includes RJ45 connectors with 50 µ" gold plating for improved contact, a latch protection to reduce the risk of clip breakage, and meter markings on the boot for easy length identification. S/FTP shielding reduces electromagnetic interference for more reliable data transmission in demanding environments.

Advantages

This MicroConnect Cat6a cable supports 10Gbit/s and up to 500 MHz, uses S/FTP shielding to minimize crosstalk and external interference, and has gold-plated 50 µ" RJ45 contacts for stable conductivity. The molded boot features meter markings for quick length checks and a reinforced latch protector to extend connector life. The 3 m length and orange jacket make it suitable for organized cabling and visible routing.

Suitable for

• High-speed LAN connections up to 10 Gbit/s
• Server rooms and data center patching
• Office networks and workstation connections
• Environments with higher electromagnetic interference

Key specifications

• Model: MicroConnect MC-SFTP6A03O
• Length: 3 m
• Standard: Cat6a (S/FTP)
• Data rate: up to 10 000 Mbit/s
• Bandwidth: up to 500 MHz
• Connector: RJ45 with 50 µ" gold plating
• Color: Orange
• MPN: MC-SFTP6A03O
• EAN: 5704174955474

How to use

Strip packaging and connect one RJ45 end to your network device and the other to the switch, patch panel or router. Ensure the latch protection is aligned when inserting the plug to avoid stress on the clip. Use the meter markings on the boot to confirm cable length when planning runs. Route the cable without tight bends and avoid placing it parallel to high-voltage power lines to maintain signal integrity.

Recommendations

For optimal performance, use the MicroConnect Cat6a S/FTP cable for links up to 3 m in structured cabling, maintain separation from strong interference sources, and verify connectors are fully seated. Replace cables showing physical damage or compromised shielding.