Cabo de rede Microconnect MC-SFTP801W branco 1 m Cat8.1 S/FTP (S-STP)

The MicroConnect CAT8.1 Patch Cable (MC-SFTP801W) is a 1 m S/FTP networking cable designed for high-speed data transfer up to 40000 Mbit/s and support for 25 Gbps operation with bandwidth up to 2000 MHz. The cable has gold-plated RJ-45 connectors and meter marking on the boot to quickly identify length. Its white jacket and standard RJ-45 terminations make it compatible with modern network equipment and patch panels.

Advantages

This Cat8.1 S/FTP cable provides enhanced shielding to reduce electromagnetic interference and crosstalk, supporting stable high-frequency signals. Gold-plated 50 μ" RJ-45 connectors offer reliable contact and corrosion resistance, while a reinforced latch protector helps prevent clip breakage. Meter markings on the boot simplify installation and cable management.

Suitable for

• Server rooms and data centers requiring 25 Gbps links
• High-performance LANs and backbone connections
• Workstations and switches where reduced interference is needed
• Short-range patching between network devices and patch panels

Key specifications

• Standard: Cat8.1 (S/FTP)
• Length: 1 m
• Max data rate: up to 40000 Mbit/s (supporting 25 Gbps operation)
• Bandwidth: up to 2000 MHz
• Connectors: RJ-45 to RJ-45, gold-plated, 50 μ"
• Colour: White
• Weight: 0.09 kg

How to use

Connect one RJ-45 end of the MicroConnect CAT8.1 cable to the network port of your device and the other to the corresponding port on a switch, router or patch panel. Ensure the cable is not sharply bent and that connectors are fully inserted until the latch clicks. Use the meter markings on the boot to confirm the installed length during routing and management.

Recommendations

For best performance, avoid running the cable parallel to power lines for long distances and maintain gentle bends with a radius larger than the cable diameter. Use this 1 m Cat8.1 cable for short patch connections in high-speed network environments where S/FTP shielding and 50 μ" gold-plated RJ-45 contacts are required.