Cabo de rede Microconnect MC-UTP6A02Y amarelo 2 m Cat6a U/UTP (UTP)

The MicroConnect MC-UTP6A02Y is a 2 m Cat6a networking cable designed for high-speed data transfer up to 10 000 Mbit/s and bandwidth up to 500 MHz. It uses RJ-45 connectors on both ends and U/UTP construction to reduce interference. The cable features gold-plated contacts and reinforced 50µ" RJ45 connectors with latch protection and a boot marked with the cable length for easy identification.

Advantages

This Cat6a patch cable supports 10Gbit networks and offers improved signal integrity thanks to gold-plated contacts and U/UTP shielding. The 50µ" RJ45 connectors provide a reliable connection, while latch protection reduces the risk of clip breakage. The marked boot makes it simple to verify cable length during installation or maintenance.

Suitable for

• 10 Gigabit Ethernet connections
• Server rooms and data centers
• High-bandwidth workstations and switches
• Structured cabling in office or home networks

Key specifications

• Length: 2 m
• Standard: Cat6a
• Maximum data rate: up to 10 000 Mbit/s
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Contacts: gold-plated
• Colour: Yellow
• Weight: 0.06 kg

How to use

Connect one RJ-45 end to your network device (switch, router, server or PC) and the other end to the corresponding port on the remote device. Ensure connectors click into place to confirm secure latching. Route the cable to avoid sharp bends and sources of strong electromagnetic interference. Use the length marking on the boot to confirm the cable length when planning or troubleshooting installations.

Recommendations

For optimal performance, keep cable runs within recommended distances for structured cabling and avoid running parallel to high-voltage power lines. Inspect the latch protection and connector contacts before installation and replace the cable if any physical damage is detected.