Cabo de rede Microconnect MC-UTP6A30O laranja 30 m Cat6a U/UTP (UTP)

The MicroConnect MC-UTP6A30O Cat6a patch cable is a 30 m orange networking cable with RJ-45 connectors designed for high-speed data transfer up to 10000 Mbit/s and bandwidth up to 500 MHz. The cable uses U/UTP construction for reduced interference and gold-plated contacts for reliable conductivity. Visible orange colour and meter markings on the boot simplify identification of cable length.

Advantages

This Cat6a cable provides 10Gbit performance and up to 500 MHz bandwidth suitable for demanding network environments. It features 50µ" gold-plated RJ45 contacts to improve connection quality, latch protection to reduce risk of clip breakage, and meter markings on the boot for quick length recognition. U/UTP shielding reduces crosstalk and interference for more stable links.

Suitable for

• Server rooms and data centres requiring 10Gbit connections
• Workstations and switches in high-bandwidth LANs
• Structured cabling installations where cable visibility is needed
• Environments where reduced interference and reliable contacts are important

Key specifications

• Length: 30 m
• Standard: Cat6a
• Maximum data rate: 10000 Mbit/s
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45
• Shielding: U/UTP
• Contacts: gold-plated, 50 µ"
• Colour: Orange

How to use

Connect each RJ-45 connector to the appropriate network port on your devices (switch, router, network card). Ensure connectors are fully inserted until the latch clicks and route the cable to avoid sharp bends and sources of electromagnetic interference. Use the meter markings on the boot to verify or measure installed length during setup.

Recommendations

For optimal performance, avoid tight bends and extreme pulling force; maintain separation from high-voltage power lines where possible. Use the cable for permanent or temporary 10Gbit links in structured cabling while verifying connector seating and continuity after installation.