Cabo de rede Microconnect UTP625S preto 25 m Cat6 U/UTP (UTP)

The Microconnect UTP625S is a 25 m Cat6 UTP networking cable with RJ-45 connectors on both ends, designed for high-speed data transfer up to 10000 Mbit/s. It conforms to the Cat6 standard with testing up to 250 MHz and is backwards compatible with Cat5e and Cat5, making it suitable for small office, home networks and entertainment setups. The cable features latch protection on the connectors and comes in a black finish.

Advantages

The cable provides reliable wired connectivity with Cat6 performance, tested to 250 MHz. U/UTP construction reduces interference for stable signals while remaining compatible with older Cat5e/Cat5 installations. RJ-45 connectors on both ends and latch protection simplify installation and help prevent connector damage during routing through tight spaces. The 25 m length covers longer runs without additional patching.

Suitable for

• Connecting switches, modems and routers to patch panels or wall outlets
• Small office and home network cabling
• Wired connections for streaming and entertainment devices
• Extensions where a 25 m Cat6 cable is needed

Key specifications

• Model: Microconnect UTP625S
• Length: 25 m
• Standard: Cat6, tested to 250 MHz
• Maximum data rate (manufacturer): 10000 Mbit/s
• Connectors: RJ-45 — both ends
• Shielding: U/UTP
• Colour: Black
• Weight: 0.828 kg

How to use

Connect one RJ-45 end to a network device such as a switch, modem or router and the other end to the destination device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch engages. Route the cable avoiding sharp bends and places where it could be pinched; the latch protection reduces the risk of connector damage during installation in confined spaces. For best performance, use the cable within the specified 25 m length and maintain proper distance from large sources of electromagnetic interference.

Recommendations

For stable Cat6 performance, avoid running the cable in parallel with power lines and keep bend radius gentle. Use appropriate cable management and secure connectors at endpoints; replace if the connector latch or cable jacket is visibly damaged.