Cabo de rede Telegärtner MP8 FS 600 LSZH-7,5 azul 7,5 m

The Telegärtner MP8 FS 600 LSZH-7,5 is a 7.5 m networking patch cable in blue designed for reliable data transmission in office and cabinet environments. Manufactured with LSZH (Low Smoke Zero Halogen) jacket material, the cable is suitable for areas where reduced smoke and toxic gas emission is required. Telegärtner offers this cable in multiple categories and lengths, and the product meets relevant channel and link transmission requirements when used in appropriate category installations.

Advantages

The cable features a moulded strain relief and integrated latch protection for improved mechanical robustness and connector protection. Using Cat.7 raw components or Cat.5e variants ensures that transmission properties meet or exceed the channel Class E and Class D requirements specified in ISO/IEC 11801 (2nd edition), with certifications available for the stated classes. The LSZH jacket reduces smoke and halogen emissions in case of fire, enhancing safety in enclosed spaces.

Suitable for

• Office network patching and workstation connections
• Control cabinets and equipment racks with IP20 protection
• Gigabit Ethernet installations using Cat.5e or higher cabling

Key specifications

• Brand: Telegärtner
• Model: MP8 FS 600 LSZH-7,5
• Length: 7.5 m
• Color: Blue
• Jacket: LSZH (Low Smoke Zero Halogen)
• MPN: L00004A0057
• EAN: 4018359286682

How to use

Connect one RJ45 connector to the network port of the device and the other to the patch panel, switch or wall outlet. Ensure connectors are fully inserted until the latch engages and avoid sharp bends or kinks near the ends; the moulded strain relief helps protect the conductor termination. Route the cable in compliance with installation practices for the chosen category to maintain specified transmission characteristics.

Recommendations

For reliable performance, select the patch cable category appropriate to your installed permanent link (Cat.5e, Cat.6, Cat.7) and keep cable runs within recommended lengths for patch cords. Use in environments where reduced smoke and halogen emissions are required; avoid exposure to liquids and excessive mechanical stress.