Cabo HDMI DELOCK 81688 — 2 m, HDMI tipo A (macho) para HDMI tipo C (Mini, macho), 48 Gbit/s, até 7680×4320, contactos dourados, preto

DELOCK 81688 is a 2 m High Speed HDMI cable with an HDMI Type A (standard) male connector and an HDMI Type C (Mini) male connector. It supports up to 48 Gbit/s data transfer and resolutions up to 7680×4320 (8K @ 60 Hz). The cable features gold-plated contacts, a braided jacket, triple shielding and a 36 AWG coaxial conductor design to ensure reliable transmission of audio and video between devices such as cameras, tablets or laptops with Mini HDMI and monitors or TVs with standard HDMI.

Advantages

The cable delivers high bandwidth for ultra-high-definition video and high frame rate content while supporting Dynamic HDR and Dolby® Vision for improved colour, contrast and brightness reproduction. eARC support enables uncompressed, lossless audio return to compatible sound systems. The braided jacket, triple shielding and gold-plated contacts contribute to signal stability and reduced interference.

Suitable for

• Connecting cameras or camcorders with Mini HDMI output to TVs or monitors
• Connecting tablets or laptops with Mini HDMI to external displays or capture devices
• Home cinema setups requiring 4K/8K video and high-quality audio via eARC
• Gaming systems that use high frame rates, HDR and VRR/Game Mode

When it may not be suitable

This cable requires devices that provide Mini HDMI (Type C) and standard HDMI (Type A) ports; it is not suitable if your source or display uses other connector types such as Micro HDMI, USB-C Alt Mode, DisplayPort or proprietary ports. Achievable resolution and refresh rates depend on the capabilities of the connected devices and their HDMI versions, so full 8K/60 Hz or higher frame rates may not be available on older hardware.

Key specifications

• Cable length: 2 m
• Connectors: HDMI Type A (male) to HDMI Type C Mini (male)
• Data transfer rate: up to 48 Gbit/s
• Maximum supported resolution: up to 7680 × 4320 @ 60 Hz
• Also supports: 5120 × 2880 @ 120 Hz; 3840 × 2160 @ 240 Hz (depending on system)
• Cable construction: 36 AWG coaxial conductors, triple shielded, braided jacket
• Contacts: gold-plated
• Audio: eARC support, up to 32 audio channels, up to 1536 kHz sampling, Dolby TrueHD and DTS-HD Master Audio support
• Video features: Dynamic HDR, Dolby® Vision, 4:4:4/4:2:2/4:2:0 colour sampling, DSC 1.2, 21:9 aspect ratio support, 3D
• Other: supports Game Mode VRR and CEC 2.0 control commands
• Colour: Black

How to use

Connect the HDMI Type C (Mini) male connector to the Mini HDMI port on your camera, tablet or laptop and plug the HDMI Type A male connector into the HDMI input of the monitor, TV or capture device. Ensure both devices are powered on and select the correct HDMI input on the display. If using features such as eARC, VRR or Dolby Vision, enable the corresponding settings on both source and display devices according to their user manuals.

What to consider before purchase

• Verify that your source device has an HDMI Type C (Mini) port and your display has an HDMI Type A port
• Check that your devices support the desired resolution, refresh rate and audio formats (e.g., 8K@60 Hz, eARC, Dolby Vision)
• Confirm 2 m cable length is sufficient for your setup
• Consider device HDMI version compatibility, as older HDMI implementations may limit bandwidth or features

Recommendations

For best results, route the cable away from large power cables and wireless transmitters to reduce interference; ensure tight but not forced connector seating and enable corresponding HDMI settings (eARC, HDR, VRR) on both connected devices.