Cabo HDMI Microconnect HDM191950V2.1OP 2.1 4K 60Hz 8K 120Hz

The Microconnect HDM191950V2.1OP HDMI cable is an active hybrid cable combining fiber optic and copper conductors to transmit high-resolution video and audio over long distances up to 100 m without data loss. It supports HDMI 2.1 bandwidths, enabling resolutions up to 8K at 120 Hz and 4K at 60 Hz, and is designed for flexible installation thanks to its lightweight construction and ultra-small bend radius.

Advantages

This active HDMI 2.1 cable maintains signal integrity over long runs by using fiber for high-speed data and copper for power and auxiliary signals. Its hybrid design reduces attenuation and electromagnetic interference while remaining lightweight and flexible. The ultra-small bend radius allows routing in tight spaces and professional installations.

Suitable for

• Connecting TVs and home theater systems over long distances
• Projector installations in conference rooms or classrooms
• Gaming consoles and high-refresh displays requiring HDMI 2.1 bandwidth
• Professional AV setups and digital signage

Key specifications

• HDMI version: 2.1 compatible
• Maximum supported resolution: up to 8K at 120 Hz and 4K at 60 Hz
• Cable type: active hybrid (fiber optic + copper conductors)
• Maximum reliable cable length: up to 100 m
• Physical properties: lightweight, flexible, ultra-small bend radius

How to use

Connect one HDMI 2.1 device (source) to the cable’s source end and the display or sink device to the cable’s other end, ensuring connectors are fully inserted. Use compatible HDMI 2.1 devices and set display resolution and refresh rate in the device settings to match the supported modes (for example 8K@120 Hz or 4K@60 Hz). Route the cable following its bend-radius limits to avoid sharp kinks and secure it as needed for a clean installation.

Recommendations

For best performance, use HDMI 2.1-capable source and display devices and avoid excessive bending near the connectors; keep the cable away from strong electromagnetic sources. If long runs approach the maximum length, verify resolutions and refresh rates in the connected devices and update device firmware if required.